LDO Regulator Pos 2.6V 0.15A 6-Pin PowerPAK TSC-75

The SiP21107 do not require a noise bypass capacitor and provides an error flag pin (POK or Power OK). POK output requires an external pull-up resistor and goes low when the supply has not come up to voltage.The SiP21106, SiP21107, SiP21108 regulators allow stable operation with very small ceramic output capacitors, reducing board space and component cost. They are designed to maintain regulation while delivering 330 mA peak current upon turn-on. During start-up, an active pull-down circuit improves the output transient response and regulation. In shutdown mode, the output automatically discharges to ground through a 100 ? NMOS.The SiP21107 is available in TSOT23-5L a super thin lead (Pb)-free TSC75-6L and SC70-5L packages for operation over the industrial operation range (- 40 °C to 85 °C).

• SC70-5L (2.1 mm x 2.1 mm x 0.95 mm)
• TSOT23-5L (3.05 mm x 2.85 mm x 1.0 mm)
• TSC75-6L package (1.6 mm x 1.6 mmx 0.55 mm), TSOT23-5L and SC70-5L Package Options
• 1.0 % output voltage accuracy at 25 °C
• Low dropout voltage: 135 mV at 150 mA
• SiP21106 low noise: 60 µV(rms) (10 Hz to 100 kHz bandwidth) with 10 nF over full load range
• 35 µA (typical) ground current at 1 mA load
• 1 µA maximum shutdown current at 85 °C
• Output auto discharge at shutdown mode
• Built-in short circuit (330 mA typical) and thermal protection (160 °C typical)
• SiP21108 adjustable output voltage
• SiP21107 POK Error Flag
• - 40 °C to + 125 °C junction temperature range for operation
• Uses low ESR ceramic capacitors
• Fixed voltage output 1.2 V to 5 V in 50 mV steps
• Compliant to RoHS Directive 2002/95/EC