Digital Potentiometer 32POS 1KOhm Single 8-Pin SOIC N T/R

The PI5L200 is a Rail-to-Rail Quad 2:1multiplexer/demultiplexer LanSwitch with 3-state outputs. The OnResistancetypically varies from 5 ohms to 7 ohms with data inputsof 0V to 5V. Generally, this part can be used to replace mechanicalrelays in low voltage (3.3V/5V systems) LAN applications. With a wide bandwidth of 135 MHz, the PI5L200 can switch FastEthernet and ATM25 signals. Into 100-ohm UTP cables, the switchdistortion is typically less than two percent. Crosstalk @30 MHz is–70dB. The PI5L200 operates from a single 3.3V/5V supply andinterface to TTL logic.

• Solid-state potentiometer
• 3-wire serial interface
• 32 wiper tap points
  • Wiper position stored in nonvolatile memory and recalled on power-up
• 31 resistive elements
  • Temperature compensated
  • End-to-end resistance range ±20%
  • Terminal voltages, -VCC to +VCC
• Low power CMOS
  • VCC = 3V or 5V
  • Active current, 3mA max.
  • Standby current, 500µA max.
• High reliability
  • Endurance, 100,000 data changes per bit
  • Register data retention, 100 years
• RTOTAL values = 1kO, 10kO, 50kO
• Packages
  • 8 Ld SOIC, 8 Ld MSOP and 8 Ld PDIP
• Pb-free available (RoHS compliant)