Module DC-DC 1-OUT 0.8V to 1.8V 10A 10-Pin DIP Module T/R

The PTH12060 series is a non-isolatedpower module, and part of a new class of complete dc/dc converters from Texas Instruments. These modules are small in size, and are an alternative for applications requiring up to 10 A of load current.The small footprint, (1 inch × 0.62 inch) and industry leading features makes this module suitable for space conscious digital systems that incorporate multiple processors.This series of modules operate from a 12-V input bus voltage to provide step-down power conversion to a wide range of output voltages. The output voltage of the W-suffix device may be set to any voltage over the adjust range, 1.2 V to 5.5 V. The L-suffix device has an adjustment range of 0.8 V to 1.8 V. The output voltage is set within the adjust range using a single external resistor.This product includes Auto-Track Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system, by enabling modules to track each other, or any other external voltage, during power up and power down.Other features include an on/off inhibit and margin up/down controls. An output voltage sense ensures tight load regulation. Non-latching overcurrent trip protects against load faults.

Up to 10-A Output Current

12-V Input Voltage

Wide-Output Voltage Adjust
(1.2 V to 5.5 V/(0.8 V to 1.8 V)

Efficiencies up to 95%

225 W/in³ Power Density

Output Voltage Sense

Margin Up/Down Controls

Undervoltage Lockout

Auto-Track Sequencing

Pre-Bias Start-up Capability
using On/Off Inhibit

Output Overcurrent Protection
(Non-latching, Auto-Reset)

Operating Temperature: -40°C to 85°C

Safety Agency Approvals:
UL/IEC/CSA C22.2 60950-1

Point-of-Load Alliance (POLA) Compatible

APPLICATIONS

• Complex Digital