Microcontroller containing a multi-purpose timer for controlling the power devices used for home electronics, and realizing 5V single supply operation to achieve control over Induction Heating (IH) appliances and motors.

High-performance microcontrollers containing a multi-purpose timer for controlling the power devices used for home electronics, and realizing 5V single supply operation to achieve control over Induction Heating (IH) appliances and motors.NANO FLASH.

• ARM Cortex-M3 microcontroller core
  • Improved code efficiency has been realized through the use of Thumb®-2 instruction
  • New 16-bit Thumb® instructions for improved program flow
  • New 32-bit Thumb instructions for improved performance
  • Auto-switching between 32-bit instruction and 16-bit instruction is executed by compiler
  • Both high performance and low power consumption have been achieved
  • High performance
  • A 32-bit multiplication (32×32=32 bit) can be executed with one clock
  • Division takes between 2 and 12 cycles depending on dividend and devisor
  • Low power consumption
  • Optimized design using a low power consumption library
  • Standby function that stops the operation of the microcontroller core
  • High-speed interrupt response suitable for real-time control
  • An interruptible long instruction
  • Stack push automatically handled by hardware
  • Interrupt sources
  • Internal: 77 factors…The order of precedence can be set over 7 levels (except NMI)
  • External: 16 factors…The order of precedence can be set over 7 levels
  • Input/Output ports 84 pins
  • Input/Output: 83 pins Output: 1pin
  • Watchdog timer (WDT): 1 channel
  • binary counter
• Power-on Reset Circuit (POR)
• Voltage Detection Circuit (VLTD)
• Oscillation Frequency Detector (OFD)
• DMA controller: 2 channels
  • Incr to Incr / Incr to No-Incr / No-Incr to Incr / No-Incr to No-Incr
  • 4word FIFO buffer for each channel 2ch
  • Scatter/gather transmission support
• 16-bit Multi Purpose Timer (MPT): 3 channels
  • Channel 0/1: Supported for PMD function / IGBT function / 16bit timer function
  • Channel 2: Supported for IGBT function / 16bit timer function
  • PMD function
  • 3-phase PWM waveforms with the same PWM frequency
  • Synctrigger signals to the AD converter
  • The protection circuit controls in emergency
  • IGBT function
  • 16-bit PPG output (Two output pins)
  • External-triggered start and stop
  • The protection circuit controls in emergency
  • 16bit timer function
  • 16-bit interval timer mode
  • 16-bit event counter mode
  • 16-bit PPG output (One output pin)
  • Input capture function