MCU 32-Bit TX03 ARM Cortex M3 RISC 1MB Flash 3.3V 144-Pin LQFP

The TMPM362 is a 32-bit RISC microprocessor series with an ARM Cortex-M3 microprocessor core.

• ARM Cortex-M3 microprocessor core
  • Improved code efficiency has been realized through the use of Thumb-2 instruction
  • New 16-bit Thumb instructions for improved program flow
  • New 32-bit Thumb instructions for improved performance
  • New Thumb mixed 16- / 32-bit instruction set can produce faster, more efficient code
  • Both high performance and low power consumption have been achieved.[High performance]
  • Both high performance and low power consumption have been achieved
  • Division takes between 2 and 12 cycles depending on dividend and devisor[Low Power consumption]
  • Optimized design using a low power consumption library
  • Standby function that stops the operation of the micro controller core
  • High-speed interrupt response suitable for real-time control
  • An interruptible long instruction
  • Stack push automatically handled by hardware
• On Chip program memory and data memory
  • On chip RAM: 64Kbyte
  • On chip Flash ROM: 1024Kbyte
• Static memory controller (SMC)
  • Up to 16Mbytes access area (Program / Data)
  • External data bus (Separate bus / Multiplex bus): 16-bit data bus width
  • Chip select / Wait controller: 4 channels
• DMA controller (DMAC): 2 channels
  • Transfer can support on chip Memory / Peripheral I/O / External memory
• 16-bit timer / event counter (TMRB): 16 channels
  • 16-bit interval timer mode
  • 16-bit event counter mode
  • 16-bit PPG output (4channel timer can start synchronously)
  • Input capture function
• Watchdog timer (WDT): 1 channel
  • Watchdog timer generates a reset or a non-maskable interrupt (NMI).
• Serial channel (SIO/UART): 12 channelsEither UART mode or I/O interface can be selected (4byte FIFO equipped)
• Serial bus interface (I²C/SIO): 5 channels
  • Either I²C bus mode or synchronous 8-bit SIO mode can be selected.
• Synchronous serial port (SSP): 1 channel
  • Communication protocol that includes SPI: 3 types (SPI/SSI/Microwire)
  • Baud rate: Master mode: 16Mbps (max.), Slave mode: 5.3Mbps (max.)
• CEC function (CEC): 1 channel
  • Transmision and reception per 1 byte
• Remote control signal preprocessor (RMC): 2 channels
  • Can receive up to 72bit data at a time