Hall Effect Sensor 3mA Unipolar 1.6V to 3.6V 4-Pin X1-DFN1216 T/R

The AH3360 is a high sensitivity micropower Unipolar Hall effect switch IC with internal pull up and pull down capability. Designed for battery powered consumer such as cellular phones and portable PCs to home appliance and industrial equipment, the average supply current is only 4.3uA at 1.85V. To support portable equipment the AH3360 can operate over the supply range of 1.6V to 3.6V and uses a hibernating clocking system to minimize the power consumption. To minimize PCB space the AH3360 is available in small low profile SOT553, X1-DFN1216-4 and X2-DFN2015-6 and packages.The output is activated with a south pole of sufficient magnetic field strength. When the magnetic flux density (B) perpendicular to the package is larger than operate point (Bop), the output will be turned on (pulled low) and held until B is lower than release point (Brp). The output will remain off when there is no magnetic field.

• Unipolar Operation (South pole to part marking side)
• Supply Voltage of 1.6V to 3.6V
• High Sensitivity
• Micropower Operation
• Chopper Stabilized Design Provides:
  • Superior Temperature Stability
  • Minimal Switch Point Drift
  • Enhanced Immunity to Physical Stress
• No External Pull-up Resistors Required
• Good RF Noise Immunity
• -40°C to +85°C Operating Temperature
• High ESD capability of 8kV Human Body Model
• Small Low Profile X1-DFN1216-4, X2-DFN2015-6 and SOT553 Packages
• Totally Lead-Free & Fully RoHS Compliant
• Halogen and Antimony Free. “Green” Device