Digital Potentiometer 32POS 10KOhm Single 8-Pin MSOP

The Intersil X9315 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal.The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.

• Solid-state potentiometer
• 3-wire serial interface
• 32 wiper tap points
  • Wiper position stored in nonvolatile memory and recalled on power-up
• 31 resistive elements
  • Temperature compensated
  • End to end resistance range ± 20%
  • Terminal voltage, 0 to VCC
• Low power CMOS
  • VCC = 2.7V or 5V
  • Active current, 80/400µA max.
  • Standby current, 5µA max.
• High reliability
  • Endurance, 100,000 data changes per bit
  • Register data retention, 100 years
• RTOTAL values = 10kO, 50kO, 100kO
• Packages - 8 Ld SOIC, MSOP and PDIP
• Pb-free available (RoHS compliant)