CAN 2Mbps Normal/Silent 5.5V 8-Pin SOIC T/R

This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per second). Devices with part numbers that include the "G" suffix are designed for data rates up to 5 Mbps, and versions with the "V" have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family of devices comes with silent mode which is also commonly referred to as listen-only mode. Additionally, all devices include many protection features to enhance device and network robustness.

• AEC Q100: Qualified for Automotive Applications
• Meets the December 17th, 2015 Draft of ISO 11898-2 Physical Layer Update
• Meets the Released ISO 11898-2:2007 and ISO 11898-2:2003 Physical Layer Standards
• "Turbo" CAN:
  • All devices support 2 Mbps CAN FD (Flexible Data Rate) and "G" options support 5 Mbps
  • Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
  • Higher Data Rates in Loaded CAN Networks
• I/O Voltage Range Supports 3.3 V and 5 V MCUs
• Ideal Passive Behavior When Unpowered
  • Bus and Logic Terminals are High Impedance (no load)
  • Power Up/Down With Glitch Free Operation On Bus and RXD Output
• Protection Features
  • HBM ESD Protection: ±16 kV
  • IEC ESD Protection up to ±15 kV
  • Bus Fault Protection: ±58 V (non-H variants) and ±70 V (H variants)
  • Undervoltage Protection on VCC and VIO (V variants only) Supply Terminals
  • Driver Dominant Time Out (TXD DTO) - Data rates down to 10 kbps
  • Thermal Shutdown Protection (TSD)
• Receiver Common Mode Input Voltage: ±30 V
• Typical Loop Delay: 110 ns
• Junction Temperatures from
  • 55°C to 150°C