Switch Mode Charger Li-Ion/Li-Pol 3000mA 72-Pin WLP T/R

The MAX77818 is a high-performance companion PMIC for the latest smart phones and tablet computers. The PMIC includes a dual input, smart power path 3.0A switch mode charger with reverse boost capability and adapter input protection up to 16VDC withstand, proprietary Model Gauge (m5) fuel gauge technology. The switch mode battery charger’s operating frequency is 4MHz and includes integrated, low-loss switches to provide the industry’s smallest L/C size, lowest heat, and fastest battery charging programmable up to 3.0A. The charger has two inputs that accept adapter/USB (CHIN) and/or wireless type inputs (WCIN). The wireless input can simultaneously charge the battery while powering USB-OTG type accessories. The USB-OTG output provides true-load disconnect and is protected by an adjustable output current limit. The battery charger includes smart power path and I2C adjustable settings to accommodate a wide range of battery sizes and system loads. When external power is applied from either input, battery charging is enabled. With a valid input power source (adapter or wireless charger), the BYP pin voltage is equal to the input voltage minus resistive voltage drop. During battery-only reverse boost operation, the BYP output can be regulated with the reverse boost feature and provides up to 5V at 1.5A and requires no additional inductor, allowing the MAX77818 to power USB OTG accessories. The switching charger is designed with a special CC, CV, and die temperature regulation algorithm. Model Gauge (m5) provides accurate battery fuel gauging without calibration and operates with extremely low battery current. The safe out LDO drive system USB interface devices. The MAX77818 features a I2C revision 3.0-compatible serial interface that comprises a bidirectional serial data line (SDA) and a serial clock line (SCL).

• Dual Input Switch mode Battery Charger
  • Adapter/USB Input
  • Up to 13.4V Adapter Charging
  • Up to 4.0A rated, Input Current Protection (Programmable)
  • Wireless Charging Input
  • Up to 5.9V Wireless Charging
  • Up to 1.26A, Input Current Protection(Programmable)
  • Support USB-OTG Accessories
  • Battery Charge Current, Up to 3.0A
  • No Sense Resistor
  • CC, CV, and Die Temperature Control
  • Integrated Battery True-Disconnect FET
  • RDS(ON) = 12.8m?
  • Rated Up to 4.5ARMS, Discharge Current Limit (Programmable)
  • Reverse Boost Capability
  • Supports USB-OTG Accessories
  • Up to 5.1V/1.5A
  • Adjustable OCP
• Model Gauge (m5) Battery Fuel Gauge
  • ±1% SOC Accuracy, No Calibration Cycles, Very Low IQ
  • Time-to-Empty and Time-to-Full Prediction
• Two Safe out LDOs
• I2C Serial Interface
• 72-Bump. 3.867mm x 3.608mm WLP with 0.4mm Pitch