SRAM Chip Sync Single 1.8V 72M-Bit 2M x 36 0.45ns 165-Pin FBGA

The CY7C25682KV18, and CY7C25702KV18 are 1.8 V Synchronous Pipelined SRAMs equipped with DDR II+ architecture. The DDR II+ consists of an SRAM core with advanced synchronous peripheral circuitry. Addresses for read and write are latched on alternate rising edges of the input (K) clock. Write data is registered on the rising edges of both K and K. Read data is driven on the rising edges of K and K. Each address location is associated with two 18-bit words (CY7C25682KV18), or 36-bit words (CY7C25702KV18) that burst sequentially into or out of the device.

• 72-Mbit density (4 M x 18, 2 M x 36)
• 550 MHz clock for high bandwidth
• Two-word burst for reducing address bus frequency
• Double data rate (DDR) interfaces (data transferred at 1100 MHz) at 550 MHz
• Available in 2.5 clock cycle latency
• Two input clocks (K and K) for precise DDR timing
• SRAM uses rising edges only
• Echo Clocks (CQ and CQ) simplify data capture in high speed systems
• Data valid pin (QVLD) to indicate valid data on the output
• For more, see pdf