B2B товарно-сырьевая площадка

MCU 32-Bit RX CISC 2MB Flash 3.3V 176-Pin LFBGA Tray

MCU 32-Bit RX CISC 2MB Flash 3.3V 176-Pin LFBGA Tray
  • 32-bit RX CPU core
    • Max. operating frequency: 100 MHz
    • Capable of 165 DMIPS in operation at 100 MHz
    • Single precision 32-bit IEEE-754 floating point
    • Two types of multiply-and-accumulation unit (between memories and between registers)
    • 32-bit multiplier (fastest instruction execution takes one CPU clock cycle)
    • Divider (fastest instruction execution takes two CPU clock cycles)
    • Fast interrupt
    • CISC Harvard architecture with 5-stage pipeline
    • Variable-length instructions: Ultra-compact code
    • Supports the memory protection unit (MPU)
    • JTAG and FINE (two-line) debugging interfaces
  • Low-power design and architecture
    • Operation from a single 2.7- to 3.6-V supply
    • Low power consumption: A product that supports all peripheral functions draws only 500 µA/MHz.
    • RTC is capable of operation from a dedicated power supply (min. operating voltage: 2.3 V).
    • Four low-power modes
  • On-chip main flash memory, no wait states
    • Supports ROM-less versions and versions with up to 2 Mbytes of ROM (ROMless/256 Kbytes/384 Kbytes/512 Kbytes: RX631 Group only)
    • 100-MHz operation, 10-ns read cycle (no wait states)
    • 768-Kbyte to 2-Mbyte capacities
    • User code is programmable by on-board or off-board programming
  • On-chip data flash memory
    • ROM-less or 32 Kbytes of ROM (reprogrammable up to 100,000 times)
    • Programming/erasing as background operations (BGOs)
  • On-chip SRAM, no wait states
    • 64 Kbytes/128 Kbytes/192 Kbytes/256 Kbytes of SRAM
    • For instructions and operands
    • Can provide backup on deep software standby
  • DMA
    • DMAC: Four channels
    • DTC
    • EXDMAC: Two channels
    • Dedicated DMAC for the Ethernet controller: Single channel
  • Reset and supply management
    • Power-on reset (POR)
    • Low voltage detection (LVD) with voltage settings
  • Independent watchdog timer
    • 125-kHz LOCO clock operation
  • Useful functions for IEC60730 compliance
    • Oscillation-stoppage detection, frequency measurement, CRC, IWDT, selfdiagnostic function for the A/D converter, etc

Caractéristiques

Brand Renesas Electronics
Operating temperature -40 to 85 °C
Schedule B 8542310000
HTSN 8542310001
SKU: R5F563NECDBG#U0