CAN 1Mbps Silent 5V 8-Pin SOIC T/R

The SN65HVD1050A meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a Controller Area Network (CAN). The device is qualified for use in automotive applications.As a CAN transceiver, this device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps)1. Designed for operation is especially harsh environments, the SN65HVD1050A features cross-wire, over-voltage, and loss of ground protection from –27 V to 40 V, over-temperature protection, a –12-V to 12-V common-mode range, and withstands voltage transients according to ISO 7637. Pin 8 provides for two different modes of operation: high-speed or silent mode. The high-speed mode of operation is selected by connecting S (pin 8) to ground. If a high logic level is applied to the S pin of the SN65HVD1050A, the device enters a listen-only silent mode during which the driver is switched off while the receiver remains fully functional. In silent mode, all bus activity is passed by the receiver output to the local protocol controller. When data transmission is required the local protocol controller must transition the device to high speed mode by placing a logic low on the S pin to resume full operation. A dominant time-out circuit in the SN65HVD1050A prevents the driver from blocking network communication with a hardware or software failure. The time-out circuit is triggered by a falling edge on TXD (pin 1). If no rising edge is seen before the time-out constant of the circuit expires, the driver is disabled. The circuit is then reset by the next rising edge on TXD. Vref (pin 5) is available as a VCC/2 voltage reference.  

Qualified for Automotive Applications

Improved Drop-In Replacement for TJA1050

Meets or Exceeds the Requirements of ISO 11898-2

GIFT/ICT Compliant

ESD Protection up to ±12 kV (Human-Body Model) on Bus Pins

High Electromagnetic Compliance (EMC)

Bus-Fault Protection of –27 V to 40 V

Dominant Time-Out Function

Thermal Shutdown Protection

Power-Up/Down Glitch-Free Bus Inputs and Outputs

• High Input Impedance With Low V_CC
• Monotonic Outputs During Power Cycling

APPLICATIONS

• GMW3122 Dual-Wire CAN Physical Layer
• SAE J2284 High-Speed CAN for Automotive Applications
• SAE J1939 Standard Data Bus Interface
• ISO 11783 Standard Data Bus Interface
• NMEA 2000 Standard Data Bus Interface