Quad Transmitter Quint Receiver RS-232 28-Pin SSOP Tube

The TRS213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.The TRS213 has an active-low shutdown (SHDN\) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. Two receivers of the TRS213 are active during shutdown.

ESD Protection for RS-232 Bus Pins

• ±15-kV Human-Body Model (HBM)

Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards

Operates at 5-V V_CC Supply

Four Drivers and Five Receivers

Operates up to 120 kbit/s

Low Supply Current in Shutdown
Mode . . . 15 µA Typ

External Capacitors . . . 4× 0.1 F

Designed to Be Interchangeable With Industry Standard "213 Devices

Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

APPLICATIONS

• Battery-Powered Systems
• PDAs
• Notebooks
• Laptops
• Palmtop PCs
• Hand-Held Equipment