MCU 32-bit C2000 C28x RISC 128KB Flash 3.3V 100-Pin HTQFP EP Tray

  The F2806x Piccolo family of microcontrollers (MCUs) provides the power of the C28x core and CLA coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration. An internal voltage regulator allows for single-rail operation. Enhancements have been made to the High-Resolution Pulse Width Modulator (HRPWM) module to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the ePWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency. 

High-Efficiency 32-Bit CPU (TMS320C28x)

• 90 MHz (11.11-ns Cycle Time)
• 16 x 16 and 32 x 32 Multiply and Accumulate (MAC) Operations
• 16 x 16 Dual MAC
• Harvard Bus Architecture
• Atomic Operations
• Fast Interrupt Response and Processing
• Unified Memory Programming Model
• Code-Efficient (in C/C++ and Assembly)

Floating-Point Unit(FPU)

• Native Single-Precision Floating-Point Operations

Programmable Control Law Accelerator(CLA)

• 32-Bit Floating-Point Math Accelerator
• Executes Code Independently of the Main CPU

Viterbi, ComplexMath, CRC Unit (VCU)

• Extends C28x Instruction Set to Support Complex Multiply, Viterbi Operations, and Cyclic Redundency Check (CRC)

Embedded Memory

• Up to 256KB of Flash
• Up to 100KB of RAM
• 2KB of One-Time Programmable (OTP) ROM

6-Channel Direct Memory Access(DMA)

Low Device and System Cost

• Single 3.3-V Supply
• No Power Sequencing Requirement
• Integrated Power-on Reset and Brown-out Reset
• Low-Power Operating Modes
• No Analog Support Pin

Endianness: LittleEndian

JTAG Boundary Scan Support

• IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture

Clocking

• Two Internal Zero-Pin Oscillators
• On-Chip Crystal Oscillator/External Clock Input
• Watchdog Timer Module
• Missing Clock Detection Circuitry

Peripheral Interrupt Expansion (PIE) BlockThat Supports All Peripheral Interrupts

Three 32-Bit CPUTimers

Advanced Control Peripherals

Up to 8 EnhancedPulse-Width Modulator (ePWM) Modules

• 16 PWM Channels Total (8 HRPWM-Capable)
• Independent 16-Bit Timer in Each Module

Three Input Enhanced Capture (eCAP)Modules

Up to 4 High-Resolution Capture (HRCAP) Modules

Upto 2 Enhanced Quadrature Encoder Pulse (eQEP) Modules

12-Bit Analog-to-DigitalConverter (ADC), Dual Sample-and-Hold (S/H)

• Up to 3.46 MSPS
• Up to 16 Channels

On-Chip TemperatureSensor

128-Bit Security Key and Lock

• Protects Secure Memory Blocks
• Prevents Reverse-Engineering of Firmware

Serial PortPeripherals

• Two Serial Communications Interface (SCI) [UART] Modules
• Two Serial Peripheral Interface (SPI) Modules
• One Inter-Integrated-Circuit (I²C) Bus
• One Multichannel Buffered Serial Port (McBSP) Bus
• One Enhanced Controller Area Network (eCAN)
• Universal Serial Bus (USB) 2.0
  (see Device Comparison Table for Availability)
  • Full-Speed Device Mode
  • Full-Speed or Low-Speed Host Mode

Up to54 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins With InputFiltering

Advanced Emulation Features

• Analysis and Breakpoint Functions
• Real-Time Debug via Hardware

2806x Packages

• 80-Pin PFP and 100-Pin PZP PowerPAD Thermally Enhanced Thin Quad Flatpacks (HTQFPs)
• 80-Pin PN and 100-Pin PZ Low-Profile Quad Flatpacks (LQFPs)