FIFO Mem Sync Dual Width Bi-Dir 64 x 18 56-Pin SSOP

The SN74ACT7813 is a 64-word × 18-bit FIFO suited for buffering asynchronous datapaths up to 67-MHz clock rates and 12-ns access times. Two devices can be configured for bidirectional data buffering without additional logic. Multiple distributed VCC and GND pins, along with Texas Instruments patented output edge control (OECTM) circuit, dampen simultaneous switching noise. The write clock (WRTCLK) and read clock (RDCLK) are free running and can be asynchronous or coincident. Data is written to memory on the rising edge of WRTCLK when WRTEN1 is high, WRTEN2\ is low, and input ready (IR) is high. Data is read from memory on the rising edge of RDCLK when RDEN\, OE1\, and OE2\ are low and output ready (OR) is high. The first word written to memory is clocked through to the output buffer regardless of the RDEN\, OE1\, and OE2\ levels. The OR flag indicates that valid data is present on the output buffer. The FIFO can be reset asynchronously to WRTCLK and RDCLK. RESET must be asserted while at least four WRTCLK and four RDCLK rising edges occur to clear the synchronizing registers. Resetting the FIFO initializes the IR, OR, and half-full (HF) flags low and the almost-full/almost-empty (AF/AE) flag high. The FIFO must be reset upon power up. The SN74ACT7813 is characterized for operation from 0°C to 70°C.

Member of the Texas Instruments Widebus^TM Family

Free-Running Read and Write Clocks Can Be Asynchronous or Coincident

Read and Write Operations Synchronized to Independent System Clocks

Input-Ready Flag Synchronized to Write Clock

Output-Ready Flag Synchronized to Read Clock

64 Words by 18 Bits

Low-Power Advanced CMOS Technology

Half-Full Flag and Programmable Almost-Full/Almost-Empty Flag

Bidirectional Configuration and Width Expansion Without Additional Logic

Fast Access Times of 12 ns With a 50-pF Load and All Data Outputs Switching Simultaneously

Data Rates up to 67 MHz

Pin-to-Pin Compatible With SN74ACT7803 and SN74ACT7805

Packaged in Shrink Small-Outline 300-mil Package Using 25-mil Center-to-Center Spacing