Data Acquisition System Single ADC Quad DAC 24-Bit 64-Pin TQFP T/R

The MSC1211 is completely integratedfamilies of mixed-signal devices incorporating ahigh-resolution delta-sigma (?S) ADC, 16-bit DACs,8-channel multiplexer, burnout detect current sources,selectable buffered input, offset DAC, Programmable GainAmplifier (PGA), temperature sensor, voltage reference,8-bit microcontroller, Flash Program Memory, Flash DataMemory, and Data SRAM On-chip peripherals include an additional 32-bitaccumulator, an SPI-compatible serial port with FIFO, dualUSARTs, multiple digital input/output ports, a watchdogtimer, low-voltage detect, on-chip power-on reset, 16-bitPWM, breakpoints, brownout reset, three timer/counters,and a system clock divider. The MSC1211 contain a hardware I2C peripheral. The devices accept low-level differential or single-ended signals directly from a transducer. The ADC provides 24bits of resolution and 24 bits of no-missing-codeperformance using a Sinc3 filter with a programmablesample rate. The ADC also has a selectable filter thatallows for high-resolution, single-cycle conversion. The microcontroller core is 8051 instruction setcompatible. The microcontroller core is an optimized 8051core that executes up to three times faster than thestandard 8051 core, given the same clock source. Thisdesign makes it possible to run the devices at a lowerexternal clock frequency and achieve the sameperformance at lower power than the standard 8051 core. The MSC1211 allow users to uniquely configure theFlash and SRAM memory maps to meet the needs of their applications. The Flash is programmable down to 2.7V using both serial and parallel programming methods. The Flash endurance is 100k Erase/Write cycles. In addition, 1280bytes of RAM are incorporated on-chip The parts have separate analog and digital supplies, whichcan be independently powered from 2.7V to +5.25V.At +3V operation, the power dissipation for each part istypically less than 4mW. The MSC1211 available in a TQFP-64 package. The MSC1211 is designed for high-resolutionmeasurement applications in smart transmitters, industrialprocess control, weigh scales, chromatography, andportable instrumentation.

• ANALOG FEATURES
• 24 Bits No Missing Codes
• 22 Bits Effective Resolution at 10Hz
  • Low Noise: 75nV
  • PGA From 1 to 128
  • Precision On-Chip Voltage Reference
  • Accuracy: 0.2%
  • Drift: 5ppm/°C
• 8 Differential/Single-Ended Channels
• On-Chip Offset/Gain Calibration
• Offset Drift: 0.1ppm/°C
• Gain Drift: 0.5ppm/°C
• On-Chip Temperature Sensor
• Selectable Buffer Input
• Burnout Detect
• 16-Bit Monotonic Voltage DACS:
  • Quad Voltage DACs (MSC1211)
• DIGITAL FEATURES
• Microcontroller Core
• 8051-Compatible
• High-Speed Core
  • 4 Clocks per Instruction Cycle
• DC to 40MHz at +85 C
• Single Instruction 100ns
• Dual Data Pointer
• Memory
• Up To 32kB Flash Memory
• Flash Memory Partitioning
• Endurance 1M Erase/Write Cycles, 100-Year Data Retention
• In-System Serially Programmable
• External Program/Data Memory (64kB)
• 1,280 Bytes Data SRAM
• Flash Memory Security
• 2kB Boot ROM
• Programmable Wait State Control
• Peripheral Features
• 34 I/O Pins
• Additional 32-Bit Accumulator
• Three 16-Bit Timer/Counters
• System Timers
• Programmable Watchdog Timer
• Full-Duplex Dual USARTs
• Master/Slave SPI? with DMA
• Multi-master I2C? (MSC1211 and MSC1213)
• 16-Bit PWM
• Power Management Control
• Internal Clock Divider
• Idle Mode Current < 200µA
• Stop Mode Current < 100nA
• Programmable Brownout Reset
• Programmable Low-Voltage Detect
• 24 Interrupt Sources
• Two Hardware Breakpoints
• GENERAL FEATURES
• Pin-Compatible with MSC1210
• Package: TQFP-64
• Low Power: 4mW
• Industrial Temperature Range:-40°C to +125°C
• Power Supply: 2.7V to 5.25V