32K x 16 Dual-Port RAM

The IDT7027 is a high-speed 32K x 16 Dual-Port Static RAM, designed to be used as a stand-alone 512K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 32-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32- bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic. The device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down feature controlled by the chip enables (CE0 and CE1) permits the on-chip circuitry of each port to enter a very low standby power mode. Fabricated using CMOS high-performance technology, these devices typically operate on only 750mW of power. The IDT7027 is packaged in a 100-pin Thin Quad Flatpack (TQFP) and a 108-pin ceramic Pin Grid Array (PGA).

• True Dual-Ported memory cells which allow simultaneous access of the same memory location
• High-speed access
  • Commercial: 15/20/25/35/55ns (max.) -
  • Industrial: 20/25ns (max.)
• Low-power operation
  • IDT7027L Active: 750mW (typ.) Standby: 1mW (typ.)
• Separate upper-byte and lower-byte control for bus matching capability.
• Dual chip enables allow for depth expansion without external logic HIGH-SPEED 32K x 16 DUAL-PORT STATIC RAM IDT7027L
• IDT7027 easily expands data bus width to 32 bits or more using the Master/Slave select when cascading more than one device
• M/S = VIH for BUSY output flag on Master, M/S = VIL for BUSY input on Slave
• Busy and Interrupt Flags
• On-chip port arbitration logic
• Full on-chip hardware support of semaphore signaling between ports
• Fully asynchronous operation from either port
• TTL-compatible, single 5V (±10%) power supply
• Available in 100-pin Thin Quad Flatpack (TQFP) and 108-pin Ceramic Pin Grid Array (PGA)
• Industrial temperature range (-40°C to +85°C) is available for selected speeds