MPLAB PM3 SOCKET MODULE FOR 44L TQFP 10X10 (24JS DEVICES)

28/44-Pin dsPIC30F1010/202X Enhanced Flash SMPS 16-Bit Digital Signal Controller

• High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• 83 base instructions with flexible addressing modes
• 24-bit wide instructions, 16-bit wide data path
• 12 Kbytes on-chip Flash program space
• 512 bytes on-chip data RAM
• 16 x 16-bit working register array
• Up to 30 MIPS operation:
  • Dual Internal RC
  • 9.7 and 14.55 MHz (±1%) Industrial Temp
  • 6.4 and 9.7 MHz (±1%) Extended Temp
  • 32X PLL with 480 MHz VCO
  • PLL inputs ±3%
  • External EC clock 6.0 to 14.55 MHz
  • HS Crystal mode 6.0 to 14.55 MHz
• 32 interrupt sources
• Three external interrupt sources
• 8 user-selectable priority levels for each interrupt
• 4 processor exceptions and software traps
• DSP Engine Features:
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional saturation logic
• 17-bit x 17-bit single-cycle hardware fractional/integer multiplier
• Single-cycle Multiply-Accumulate (MAC) operation
• 40-stage Barrel Shifter
• Dual data fetch
• Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules
• One 16-bit Capture input functions
• Two 16-bit Compare/PWM output functions
  • Dual Compare mode available
• 3-wire SPI modules (supports 4 Frame modes)
• I2CTM module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
• UART Module:
  • Supports RS-232, RS-485 and LIN 1.2
  • Supports IrDA® with on-chip hardware endec
  • Auto wake-up on Start bit
  • Auto-Baud Detect
  • 4-level FIFO buffer
• Power Supply PWM Module Features:
• Four PWM generators with 8 outputs
• Each PWM generator has independent time base and duty cycle
• Duty cycle resolution of 1.1 ns at 30 MIPS
• Individual dead time for each PWM generator:
  • Dead-time resolution 4.2 ns at 30 MIPS
  • Dead time for rising and falling edges
• Phase-shift resolution of 4.2 ns @ 30 MIPS
• Frequency resolution of 8.4 ns @ 30 MIPS
• PWM modes supported:
  • Complementary
  • Push-Pull
  • Multi-Phase
  • Variable Phase
  • Current Reset
  • Current-Limit
• Independent Current-Limit and Fault Inputs
• Output Override Control
• Special Event Trigger
• PWM generated ADC Trigger