MCU 32-Bit SPC560B64x e200z0h RISC 1536KB Flash 3.3V/5V 176-Pin LQFP Tray

The SPC560B64A100S, SPC560BADPT144S and SPC560BADPT176S are evaluation systems supporting the STMicroelectronics SPC560Bxx family of automotive microprocessors. The complete system consists of a SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.The evaluation systems allow full access to the CPU, to all of the CPU’s I/O signals and to the motherboard’s peripherals (such as CAN, SCI and LIN).The mini modules itself can be used as a stand-alone unit when access to the I/O pins or peripherals is not needed.

SPC560Bxx modular evaluation system

On/off power switch with LED indicators

Board power supply: 12 VDC external supply voltage

Onboard STMicroelectronics® L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V

Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target

Up to two CAN channels with jumper enable1

One CAN channel with High-Speed transceiver and DB9 male connector

One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector

Up to two LIN channels with jumper enable^(a)

One channel with transceiver and pin header connector populated

One channel with footprints only

One SCI channel with jumper enables, transceiver and DB9 female connector

Four user push buttons with jumper enable and polarity selection

Four user LED’s with jumper enables

One potentiometer for analog voltage input

Pin array for accessing all I/O signals

Expansion connectors for accessing all I/O signals

Prototyping area with 0.1” spacing and SOIC footprint

Specifications:

Board size 110 mm x 75 mm

12 VDC Center Positive power supply with 2.5/5.5 mm barrel connector