Dual Transmitter/Receiver RS-485 16-Pin PDIP Tube

The SN751177 and SN751178 dual differential drivers and receivers are monolithic integrated circuits that are designed for balanced multipoint bus transmission at rates up to 10 Mbit/s. They are designed to improve the performance of full-duplex data communications over long bus lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.10 and V.11. The SN751177 and SN751178 driver outputs provide limiting for both positive and negative currents and thermal-shutdown protection from line-fault conditions on the transmission bus line. The receiver features high input impedance of at least 12k O, an input sensitivity of ±200 mV over a common-mode input voltage range of -12 V to 12 V, and typical input hysteresis of 50 mV. Fail-safe design ensures that if the receiver inputs are open, the receiver outputs always will be high. The SN751177 and SN751178 are characterized for operation from-20°C to 85°C.

Meet or Exceed the Requirements of ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.10 and V.11

Designed for Multipoint Bus Transmission on Long Bus Lines in Noise Environments

Driver Positive- and Negative-Current Limiting

Thermal Shutdown Protection

Driver 3-State Outputs

Receiver Common-Mode Input Voltage Range of -12 V to 12 V

Receiver Input Sensitivity...±200 mV

Receiver Hysteresis...50 mV Typ

Receiver Input Impedance...12k O Min

Receiver 3-State Outputs (SN751177 Only)

Operate From Single 5-V Supply