CCFL Inverter Dual Lamp 8W 40KHz 11-Pin

Optimum one-connector, two-output design for thin liquid crystal panel displays.
Two 4W lamp outputs(8W total output) give sufficient power margin for use with 12 inch liquid crystal displays. 15 inch displays can also be designed using an inverter of the same size.
This inverter carries a PMW(pulse modulation width) circuit, TDK’s unique circuit design. This allows dimming of lighting over a much wider range than is possible using conventional types of dimmer circuits. The type of dimmer control can be selected as desired, either voltage control(Vbr=0.45 to 1.6V) or resistance control(VR:0 to 10k?).
Built-in overcurrent protection circuit increases safety.
Monitor brightness is always kept stable since the built-in current feedback illumination stabilization circuit compensates for inverter input voltage variation(±10%).
The board backside is free of wiring pattern. Cost reduction and simplified mounting are made possible by a design that only uses one side of the board.
Operational safety is increased by the use of two types of insulation for high voltage components.

SKU: CXA-P1212A-WJL