DSP Fixed-Point 32-Bit 150MHz 128-Pin LQFP

The TMS320F2810 device is members of the TMS320C28x DSP generation, are highly integrated, high-performance solutions for demanding control applications

High-Performance Static CMOS Technology

• 150 MHz (6.67-ns Cycle Time)
• Low-Power (1.8-V Core at 135 MHz,
  1.9-V Core at 150 MHz, 3.3-V I/O) Design

JTAG Boundary Scan Support IEEE Standard 1149.1-1990 IEEE Standard Test Access Port and Boundary-Scan Architecture

High-Performance 32-Bit CPU (TMS320C28x)

• 16 x 16 and 32 x 32 MAC Operations
• 16 x 16 Dual MAC
• Harvard Bus Architecture
• Atomic Operations
• Fast Interrupt Response and Processing
• Unified Memory Programming Model
• 4M Linear Program/Data Address Reach
• Code-Efficient (in C/C++ and Assembly)
• TMS320F24x/LF240x Processor Source Code Compatible

On-ChipMemory

• Flash Devices: Up to 128K x 16 Flash
  (Four 8K x 16 and Six 16K x 16 Sectors)
• ROM Devices: Up to 128K x 16 ROM
• 1K x 16 OTP ROM
• L0 and L1: 2 Blocks of 4K x 16 Each Single-Access RAM (SARAM)
• H0: 1 Block of 8K x 16 SARAM
• M0 and M1: 2 Blocks of 1K x 16 Each SARAM

Boot ROM (4K x16)

• With Software Boot Modes
• Standard Math Tables

External Interface(2812)

• Over 1M x 16 Total Memory
• Programmable Wait States
• Programmable Read/Write Strobe Timing
• Three Individual Chip Selects

Endianness: Little Endian

Clock and SystemControl

• Dynamic PLL Ratio Changes Supported
• On-Chip Oscillator
• Watchdog Timer Module

Three ExternalInterrupts

Peripheral Interrupt Expansion (PIE) Block That Supports 45Peripheral Interrupts

Three 32-Bit CPU-Timers

128-BitSecurity Key/Lock

• Protects Flash/ROM/OTP and L0/L1 SARAM
• Prevents Firmware Reverse-Engineering

Motor ControlPeripherals

• Two Event Managers (EVA, EVB)
• Compatible to 240xA Devices

Serial PortPeripherals

• Serial Peripheral Interface (SPI)
• Two Serial Communications Interfaces (SCIs), Standard UART
• Enhanced Controller Area Network (eCAN)
• Multichannel Buffered Serial Port (McBSP)

12-Bit ADC, 16Channels

• 2 x 8 Channel Input Multiplexer
• Two Sample-and-Hold
• Single/Simultaneous Conversions
• Fast Conversion Rate: 80 ns/12.5 MSPS

Up to 56General-Purpose I/O (GPIO) Pins

Advanced EmulationFeatures

• Analysis and Breakpoint Functions
• Real-Time Debug via Hardware

Development ToolsInclude

• ANSI C/C++ Compiler/Assembler/Linker
• Code Composer Studio IDE
• DSP/BIOS
• JTAG Scan Controllers⁽¹⁾

Low-PowerModes and Power Savings

• IDLE, STANDBY, HALT Modes Supported
• Disable Individual Peripheral Clocks

PackageOptions

• 179-Ball MicroStar BGA With External Memory Interface (GHH, ZHH) (2812)
• 176-Pin Low-Profile Quad Flatpack (LQFP) With External Memory Interface (PGF) (2812)
• 128-Pin LQFP Without External Memory Interface (PBK) (2810, 2811)

Temperature Options

• A: –40°C to 85°C (GHH, ZHH, PGF, PBK)
• S: –40°C to 125°C (GHH, ZHH, PGF, PBK)
• Q: –40°C to 125°C (PGF, PBK) [Q100 Qualification]