Volt Supervisor Supply 0V to 3.6V 6-Pin SOT-23 T/R

The TPS310x and TPS311x families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems.During power-on, RESET is asserted when the supply voltage (VDD) becomes higher than 0.4 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output active as long as VDD remains below the threshold voltage (VIT). An internal timer delays the return of the output to the inactive state to ensure proper system reset. The delay time starts after VDD has risen above VIT. When VDD drops below VIT, the output becomes active again. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider. The TPS3103 and TPS3106 have an active-low, open-drain RESET output. The TPS3110 has an active-low push/pull (RESET). The product spectrum is designed for supply voltages of 0.9 V up to 3.3 V. The circuits are available in SOT23-6 packages. The TPS31xx family is characterized for operation over a temperature range of -40°C to +85°C.

Precision Supply Voltage SupervisionRange: 0.9 V, 1.2 V, 1.5 V, 1.6 V, 2 V, and 3.3 V

High Trip-Point Accuracy: 0.75%

Supply Current of 1.2 µA (typical)

RESET Defined With Input Voltages as Low as 0.4 V

Power-On Reset Generator With a Delay Time of 130 ms

Push/Pull or Open-Drain RESET Outputs

SOT23-6 Package

Package Temperature Range:-40°C to +85°C

APPLICATIONS

• Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors
• Portable- and Battery-Powered Equipment
• Intelligent Instruments
• Wireless Communication Systems
• Industrial Equipment
• Notebook/Desktop Computers