Digital Potentiometer 16POS 10KOhm Single 8-Pin MSOP T/R

The X9116 is a digitally controlled nonvolatile potentiometer designed to be used in trimmer applications. The pot consists of 15 equal resistor segments that connect to the wiper pin through programmable CMOS switches. The tap position is programmed through a 3-wire up/down serial port. The last position of the wiper is stored in a nonvolatile memory location which is recalled at the time of power up of the device. The wiper moves through sequential tap positions with inputs on the serial port. A falling edge on INC (bar) causes the tap position to increment one position up or down based on whether the U/D (bar) pin is held high or low. The X9116 can be used in many applications requiring a variable resistance. In many cases it can replace a mechanical trimmer and offers many advantages such as temperature and time stability as well as the reliability of a solid state solution.

• Solid-state nonvolatile
• 16 wiper taps
• 3-wire up/down serial interface
• VCC = 2.7V and 5V
• Active current < 50µA max.
• Standby current < 5µA max.
• RTOTAL = 10kO
• Packages: 8 Ld MSOP, 8 Ld SOIC
• Pb-free plus anneal available (RoHS compliant)