ADC Single SAR 200ksps 12-bit Serial 20-Pin SOIC T/R

The TLV2553 is a 12-bit, switched-capacitor, successive-approximation, analog-to-digital converter. The ADC has three control inputs [chip select (CS)\, the input-output clock, and the address/control input (DATAIN)], designed for communication with the serial port of a host processor or peripheral through a serial 3-state output.In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages using configuration register 1. The sample-and-hold function is automatic. At the end of conversion, when programmed as EOC, the pin 19 output goes high to indicate that conversion is complete. The converter incorporated in the device features differential, high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV2553I is characterized for operation from TA = –40°C to 85°C.

12-Bit-Resolution A/D Converter

Up to 200 KSPS (150 KSPS for 3 V) Throughput Over Operating Temperature Range With 12-Bit Output Mode

11 Analog Input Channels

3 Built-In Self-Test Modes

Inherent Sample and Hold Function

Linearity Error ...±1 LSB Max

On-Chip Conversion Clock

Unipolar or Bipolar Output Operation

Programmable MSB or LSB First

Programmable Power Down

Programmable Output Data Length

SPI Compatible Serial Interface With I/O Clock Frequencies up to 15 MHz (CPOL=0, CPHA=0)

APPLICATIONS

• Process Control
• Portable Data Logging
• Battery-Powered Instruments
• Automotive