LCD DRVR 3.3V/5V 16-Pin VQFN EP T/R

The TPS6512x DC-DC converter supplies all three voltages required by amorphous-silicon (a-Si) and low-temperature poly-silicon (LTPS) TFT-LCD displays. The compact layout of the TPS6512x uses a single inductor to generate independently-regulated positive and negative outputs. A free-running variable peak current PWM control scheme time-multiplexes the inductor between outputs. This control architecture operates at a pseudo-fixed-frequency to provide fast response to line and load transients while maintaining a relatively constant switching frequency and high efficiency over a wide range of input and output voltages. Due to the high switching frequency capability of the device, inexpensive and ultra-thin 8.2 or 10 µH inductors can be used. The main output, VMAIN, is post-regulated to provide a low-ripple source drive voltage for the LCD display. The auxiliary outputs generate a boosted output voltage, VGH, up to 20 V, and a negative output voltage, VGL, down to -18 V for the LCD gate drive. The device has internal current limiting for high reliability under fault conditions. Additionally, the device offers a fixed output linear regulator for the LCD logic circuitry.

Main Output, V_MAIN

• Adjustable Voltage, 3.0 V to 5.6 V/25 mA
• Post-Regulated for Low Ripple (5mV_PP)
• ±0.8% Typical Accuracy
• Efficiency up to 83%

Positive Output, V_GH

• Adjustable Voltage up to 20 V/2 mA
• ±3% Typical Accuracy

Negative Output, V_GL

• Adjustable Voltage down to -18 V/2 mA
• ±3% Typical Accuracy

Auxiliary 1.8 V/3.3 V Linear Regulator

Automatic or Programmable Power Sequencing

Complete 1 mm Component Profile Solution

2.5 V to 5.5 V Input Voltage Range

Output Short Circuit Protected

16-Pin QFN Package (3 × 3 × 0,9 mm)

APPLICATIONS

• Small Form Factor a-Si and LTPS TFT LCD
• Cell Phones, Smart Phones
• PDAs, Pocket PCs
• Portable DVD
• Digital-Still Cameras, Camcorders
• Handheld Instruments
• Portable GPS
• Car Navigation Systems