SRAM Chip Sync Single 3.3V 4.5M-Bit 128K x 36 3.8ns 100-Pin TQFP

The IDT71V3576 are high-speed SRAMs organized as 128K x 36. The IDT71V3576/78 SRAMs contain write, data, address and control registers. Internal logic allows the SRAM to generate a self-timed write based upon a decision which can be left until the end of the write cycle. The burst mode feature offers the highest level of performance to the system designer, as the IDT71V3576 can provide four cycles of data for a single address presented to the SRAM. An internal burst address counter accepts the first cycle address from the processor, initiating the access sequence. The first cycle of output data will be pipelined for one cycle before it is available on the next rising clock edge. If burst mode operation is selected (ADV=LOW), the subsequent three cycles of output data will be available to the user on the next three rising clock edges. The order of these three addresses are defined by the internal burst counter and the LBO input pin. The IDT71V3576 SRAMs utilize the latest high-performance CMOS process and are packaged in a JEDEC standard 14mm x 20mm 100-pin thin plastic quad flatpack (TQFP).

• 128K x 36 memory configuration
• Supports high system speed:
  • Commercial and Industrial: - 150MHz 3.8ns clock access time - 133MHz 4.2ns clock access time
• LBO input selects interleaved or linear burst mode
• Self-timed write cycle with global write control (GW), byte write enable (BWE), and byte writes (BWx)
• 3.3V core power supply
• Power down controlled by ZZ input
• 3.3V I/O
• Packaged in a JEDEC Standard 100-pin plastic thin quad flatpack (TQFP)