PHY 1-CH 12Mbps/480Mbps 40-Pin VF-BGA T/R

The USB3290 provides the Physical Layer (PHY) interface to a USB 2.0 Device Controller. The IC is available in a 40 ball lead-free RoHS compliant VFBGA package. The small footprint package makes the USB3290 ideal for portable consumer electronics applications. 1.1 Product Description The USB3290 is an industrial temperature USB 2.0 physical layer transceiver (PHY) integrated circuit. SMSC’s proprietary technology results in low power dissipation, which is ideal for building a bus powered USB 2.0 peripheral. The PHY uses an 8-bit bidirectional parallel interface, which complies with the USB Transceiver Macrocell Interface (UTMI) specification. It supports 480Mbps transfer rate, while remaining backward compatible with USB 1.1 legacy protocol at 12Mbps. All required termination and 5.25V short circuit protection of the DP/DM lines are internal to the chip. The USB3290 also has an integrated 1.8V regulator so that only a 3.3V supply is required. While transmitting data, the PHY serializes data and generates SYNC and EOP fields. It also performs needed bit stuffing and NRZI encoding. Likewise, while receiving data, the PHY de-serializes incoming data, stripping SYNC and EOP fields and performs bit un-stuffing and NRZI decoding.

• Available in a 40 ball lead-free RoHS compliant (4 x 4 x 0.9mm) VFBGA package
• Interface compliant with the UTMI specification (60MHz, 8-bit bidirectional interface)
• Only one required power supply (+3.3V)
• Supports 480Mbps Hi-Speed (HS) and 12Mbps Full Speed (FS) serial data transmission rates
• Integrated 45O and 1.5kO termination resistors reduce external component count
• Internal short circuit protection of DP and DM lines
• On-chip oscillator operates with low cost 24MHz crystal
• Latch-up performance exceeds 150mA per EIA/JESD 78, Class II
• ESD protection levels of 5kV HBM without external protection devices
• SYNC and EOP generation on transmit packets and detection on receive packets
• NRZI encoding and decoding
• Bit stuffing and unstuffing with error detection
• Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume
• Support for all test modes defined in the USB 2.0 specification
• 55mA Unconfigured Current (typical) - ideal for bus powered applications.
• 83uA suspend current (typical) - ideal for battery powered applications.
• Industrial Operating Temperature -40°C to +85°C