Описание
High-performance microcontrollers containing a multi-purpose timer for controlling the power devices used for home electronics, and realizing 5V single supply operation to achieve control over Induction Heating (IH) appliances and motors.NANO FLASH.
- ARM Cortex-M3 microcontroller core
- Improved code efficiency has been realized through the use of Thumb®-2 instruction
- New 16-bit Thumb® instructions for improved program flow
- New 32-bit Thumb instructions for improved performance
- Auto-switching between 32-bit instruction and 16-bit instruction is executed by compiler
- Both high performance and low power consumption have been achieved
- High performance
- A 32-bit multiplication (32×32=32 bit) can be executed with one clock
- Division takes between 2 and 12 cycles depending on dividend and devisor
- Low power consumption
- Optimized design using a low power consumption library
- Standby function that stops the operation of the microcontroller core
- High-speed interrupt response suitable for real-time control
- An interruptible long instruction
- Stack push automatically handled by hardware
- Interrupt sources
- Internal: 77 factors…The order of precedence can be set over 7 levels (except NMI)
- External: 16 factors…The order of precedence can be set over 7 levels
- Input/Output ports 84 pins
- Input/Output: 83 pins Output: 1pin
- Watchdog timer (WDT): 1 channel
- binary counter
- Power-on Reset Circuit (POR)
- Voltage Detection Circuit (VLTD)
- Oscillation Frequency Detector (OFD)
- DMA controller: 2 channels
- Incr to Incr / Incr to No-Incr / No-Incr to Incr / No-Incr to No-Incr
- 4word FIFO buffer for each channel 2ch
- Scatter/gather transmission support
- 16-bit Multi Purpose Timer (MPT): 3 channels
- Channel 0/1: Supported for PMD function / IGBT function / 16bit timer function
- Channel 2: Supported for IGBT function / 16bit timer function
- PMD function
- 3-phase PWM waveforms with the same PWM frequency
- Synctrigger signals to the AD converter
- The protection circuit controls in emergency
- IGBT function
- 16-bit PPG output (Two output pins)
- External-triggered start and stop
- The protection circuit controls in emergency
- 16bit timer function
- 16-bit interval timer mode
- 16-bit event counter mode
- 16-bit PPG output (One output pin)
- Input capture function
