MCU 8-Bit XC800 Core w/LIN/MDU 5V 32KB Flash 1.76kB RAM 48-Pin TQFP -40~+125°C, SAK-XC886LM-8FFA5VAC, Infineon

The XC886 is based on a high-performance 8-bit Central Processing Unit (CPU) that is compatible with the standard 8051 processor. While the standard 8051 processor is designed around a 12-clock machine cycle, the XC886 CPU uses a 2-clock machine cycle. This allows fast access to ROM or RAM memories without wait state. Access to the Flash memory, however, requires an additional wait state (one machine cycle). The instruction set consists of 45% one-byte, 41% two-byte and 14% three-byte instructions. The XC886 CPU provides a range of debugging features, including basic stop/start, single-step execution, breakpoint support and read/write access to the data memory, program memory and Special Function Registers (SFRs).

  • High-performance XC800 Core
  • On-chip memory
  • I/O port supply at 3.3 V or 5.0 V and core logic supply at 2.5 V (generated by embedded voltage regulator)
  • Power-on reset generation
  • Brownout detection for core logic supply
  • On-chip OSC and PLL for clock generation
  • Power saving modes
  • Programmable 16-bit Watchdog Timer (WDT)
  • Six ports
  • 8-channel, 10-bit ADC
  • Four 16-bit timers
  • Multiplication/Division Unit for arithmetic operations (MDU)
  • CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
  • MultiCAN with 2 nodes, 32 message objects
  • Two Capture/compare units
  • Two full-duplex serial interfaces (UART and UART1)
  • Synchronous serial channel (SSC)
  • On-chip debug support

Характеристики

Pin_count

48

Supplier_package

TQFP

Тип интерфейса

SPI/UART

Instruction_set_architecture

CISC

Htsn

8542310001

Device_core

XC800

Data_memory_size

4 Kb

Data_bus_width

8 Bit

Country_of_origin

United States

Бренд

Eccn

EAR99

Maximum_speed

24 MHz

Mounting

Surface Mount

Watchdog

2

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS13207/INFNS13207-1.pdf?hkey=52A5661711E402568146F3353EA87419

Msl_level

3

Screening_level

Automotive

Schedule_b

8542390000

Ram_size

1.75 KB

Program_memory_type

Flash

Program_memory_size

32 Kb

Min_operating_supply_voltage

4.5 V

Product_dimensions

7 x 7 x 1 mm

Operating_temperature

-40 to 125 °C

Operating_supply_voltage

5.0000 V

On_chip_adc

8-chx10-bit

Number_of_timers

4

Number_of_programmable_i_os

34

Max_operating_supply_voltage

5.5 V

Артикул: SAK-XC886LM-8FFA5VAC

Описание

The XC886 is based on a high-performance 8-bit Central Processing Unit (CPU) that is compatible with the standard 8051 processor. While the standard 8051 processor is designed around a 12-clock machine cycle, the XC886 CPU uses a 2-clock machine cycle. This allows fast access to ROM or RAM memories without wait state. Access to the Flash memory, however, requires an additional wait state (one machine cycle). The instruction set consists of 45% one-byte, 41% two-byte and 14% three-byte instructions. The XC886 CPU provides a range of debugging features, including basic stop/start, single-step execution, breakpoint support and read/write access to the data memory, program memory and Special Function Registers (SFRs).

  • High-performance XC800 Core
  • On-chip memory
  • I/O port supply at 3.3 V or 5.0 V and core logic supply at 2.5 V (generated by embedded voltage regulator)
  • Power-on reset generation
  • Brownout detection for core logic supply
  • On-chip OSC and PLL for clock generation
  • Power saving modes
  • Programmable 16-bit Watchdog Timer (WDT)
  • Six ports
  • 8-channel, 10-bit ADC
  • Four 16-bit timers
  • Multiplication/Division Unit for arithmetic operations (MDU)
  • CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
  • MultiCAN with 2 nodes, 32 message objects
  • Two Capture/compare units
  • Two full-duplex serial interfaces (UART and UART1)
  • Synchronous serial channel (SSC)
  • On-chip debug support

Детали

Pin_count

48

Supplier_package

TQFP

Тип интерфейса

SPI/UART

Instruction_set_architecture

CISC

Htsn

8542310001

Device_core

XC800

Data_memory_size

4 Kb

Data_bus_width

8 Bit

Country_of_origin

United States

Бренд

Eccn

EAR99

Maximum_speed

24 MHz

Mounting

Surface Mount

Watchdog

2

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS13207/INFNS13207-1.pdf?hkey=52A5661711E402568146F3353EA87419

Msl_level

3

Screening_level

Automotive

Schedule_b

8542390000

Ram_size

1.75 KB

Program_memory_type

Flash

Program_memory_size

32 Kb

Min_operating_supply_voltage

4.5 V

Product_dimensions

7 x 7 x 1 mm

Operating_temperature

-40 to 125 °C

Operating_supply_voltage

5.0000 V

On_chip_adc

8-chx10-bit

Number_of_timers

4

Number_of_programmable_i_os

34

Max_operating_supply_voltage

5.5 V