Description
The XC88x-Series expands infineon’s 8-bit XC800 microcontroller (MCU) family to provide more scalable performance and up to 32 KB Flash memory for cost-sensitive industrial applications. Operating at up to 24 MHz and equipped with a 16-bit vector computer XC886 MCUs offers 16-bit performance at 8-bit costs.
- High-performance XC800 Core
- compatible with standard 8051 processor
- two clocks per machine cycle architecture (for memory access without wait state)
- two data pointers
- On-chip memory
- 12 Kbytes of Boot ROM
- 256 bytes of RAM
- 1.5 Kbytes of XRAM
- 24/32 Kbytes of Flash(includes memory protection strategy)
- I/O port supply at 5.0 V and core logic supply at 2.5 V (generated by embeddedvoltage regulator)
- Power-on reset generation
- Brownout detection for core logic supply
- On-chip OSC and PLL for clock generation
- PLL loss-of-lock detection
- Power saving modes
- slow-down mode
- idle mode
- power-down mode with wake-up capability via RXD or EXINT0
- clock gating control to each peripheral
- Programmable 16-bit Watchdog Timer (WDT)
- Six ports
- Up to 48 pins as digital I/O
- 8 pins as digital/analog input
- 8-channel, 10-bit ADC
- Four 16-bit timers
- Timer 0 and Timer 1 (T0 and T1)
- Timer 2 and Timer 21 (T2 and T21)
- Multiplication/Division Unit for arithmetic operations (MDU)
- Software libraries to support floating point and MDU calculations
- CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
- MultiCAN with 2 nodes, 32 message objects
- Capture/compare unit for PWM signal generation (CCU6)
- Two full-duplex serial interfaces (UART and UART1)
- Synchronous serial channel (SSC)
- On-chip debug support
- 1 Kbyte of monitor ROM (part of the 12-Kbyte Boot ROM)
- 64 bytes of monitor RAM
- Package:PG-TQFP-48
- Temperature range TA: SAL (-40 to 150 °C)
