MCU 8-bit XC800 8051 CISC 24KB Flash 2.5V/5V, XC888LM6FFA5VACKXUMA1, Infineon

THE XC886/888LM enhances the XC800 family of 8-bit µCs with a new member providing advanced motor drive capability by combining up to 32 KByte of embedded Flash with a powerful capture compare unit (CCU6) for flexible PWM generation and the new Multiplication/Division Unit (MDU) for fast mathematical computations. ADDITIONAL KEY FEATURES include support for LIN, a highly accurate 10-bit ADC with fast conversion speed and a CORDIC unit.

  • High-performance XC800 Core
    • compatible with standard 8051 processor
    • two clocks per machine cycle architecture (for memory access without wait state)
    • two data pointers
  • On-chip memory
    • 12 Kbytes of Boot ROM
    • 256 bytes of RAM
    • 1.5 Kbytes of XRAM
    • 24/32 Kbytes of Flash; or 24/32 Kbytes of ROM, with additional 4 Kbytes of Flash(includes memory protection strategy)
  • I/O port supply at 3.3 V or 5.0 V and core logic supply at 2.5 V (generated by embedded voltage regulator)
  • Power-on reset generation
  • Brownout detection for core logic supply
  • On-chip OSC and PLL for clock generation
    • PLL loss-of-lock detection
  • Power saving modes
    • slow-down mode
    • idle mode
    • power-down mode with wake-up capability via RXD or EXINT0
    • clock gating control to each peripheral
  • Programmable 16-bit Watchdog Timer (WDT)
  • Six ports
    • Up to 48 pins as digital I/O
    • 8 pins as digital/analog input
  • 8-channel, 10-bit ADC
  • Four 16-bit timers
    • Timer 0 and Timer 1 (T0 and T1)
    • Timer 2 and Timer 21 (T2 and T21)
  • Multiplication/Division Unit for arithmetic operations (MDU)
  • Software libraries to support floating point and MDU calculations
  • CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
  • MultiCAN with 2 nodes, 32 message objects
  • Capture/compare unit for PWM signal generation (CCU6)
  • Two full-duplex serial interfaces (UART and UART1)
  • Synchronous serial channel (SSC)
  • On-chip debug support
    • 1 Kbyte of monitor ROM (part of the 12-Kbyte Boot ROM)
    • 64 bytes of monitor RAM
  • Packages:
    • PG-TQFP-48
    • PG-TQFP-64
  • Temperature range TA:
    • SAF (-40 to 85 °C)
    • SAK (-40 to 125 °C)

Характеристики

Number_of_programmable_i_os

48

Number_of_timers

4

On_chip_adc

8-chx10-bit

Operating_supply_voltage

2.5, 5 V

Operating_temperature

-40 to 125 °C

Product_dimensions

mm

Min_operating_supply_voltage

2.3, 4.5 V

Program_memory_size

24 Kb

Program_memory_type

Flash

Ram_size

1.75 KB

Schedule_b

8542310000

Screening_level

Automotive

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS13207/INFNS13207-1.pdf?hkey=52A5661711E402568146F3353EA87419

Watchdog

1

Maximum_speed

24 MHz

Eccn

EAR99

Бренд

Data_bus_width

8 Bit

Device_core

8051

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

JTAG/SPI/SSC/UART

Max_operating_supply_voltage

2.7, 5.5 V

Артикул: XC888LM6FFA5VACKXUMA1

Описание

THE XC886/888LM enhances the XC800 family of 8-bit µCs with a new member providing advanced motor drive capability by combining up to 32 KByte of embedded Flash with a powerful capture compare unit (CCU6) for flexible PWM generation and the new Multiplication/Division Unit (MDU) for fast mathematical computations. ADDITIONAL KEY FEATURES include support for LIN, a highly accurate 10-bit ADC with fast conversion speed and a CORDIC unit.

  • High-performance XC800 Core
    • compatible with standard 8051 processor
    • two clocks per machine cycle architecture (for memory access without wait state)
    • two data pointers
  • On-chip memory
    • 12 Kbytes of Boot ROM
    • 256 bytes of RAM
    • 1.5 Kbytes of XRAM
    • 24/32 Kbytes of Flash; or 24/32 Kbytes of ROM, with additional 4 Kbytes of Flash(includes memory protection strategy)
  • I/O port supply at 3.3 V or 5.0 V and core logic supply at 2.5 V (generated by embedded voltage regulator)
  • Power-on reset generation
  • Brownout detection for core logic supply
  • On-chip OSC and PLL for clock generation
    • PLL loss-of-lock detection
  • Power saving modes
    • slow-down mode
    • idle mode
    • power-down mode with wake-up capability via RXD or EXINT0
    • clock gating control to each peripheral
  • Programmable 16-bit Watchdog Timer (WDT)
  • Six ports
    • Up to 48 pins as digital I/O
    • 8 pins as digital/analog input
  • 8-channel, 10-bit ADC
  • Four 16-bit timers
    • Timer 0 and Timer 1 (T0 and T1)
    • Timer 2 and Timer 21 (T2 and T21)
  • Multiplication/Division Unit for arithmetic operations (MDU)
  • Software libraries to support floating point and MDU calculations
  • CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
  • MultiCAN with 2 nodes, 32 message objects
  • Capture/compare unit for PWM signal generation (CCU6)
  • Two full-duplex serial interfaces (UART and UART1)
  • Synchronous serial channel (SSC)
  • On-chip debug support
    • 1 Kbyte of monitor ROM (part of the 12-Kbyte Boot ROM)
    • 64 bytes of monitor RAM
  • Packages:
    • PG-TQFP-48
    • PG-TQFP-64
  • Temperature range TA:
    • SAF (-40 to 85 °C)
    • SAK (-40 to 125 °C)

Детали

Number_of_programmable_i_os

48

Number_of_timers

4

On_chip_adc

8-chx10-bit

Operating_supply_voltage

2.5, 5 V

Operating_temperature

-40 to 125 °C

Product_dimensions

mm

Min_operating_supply_voltage

2.3, 4.5 V

Program_memory_size

24 Kb

Program_memory_type

Flash

Ram_size

1.75 KB

Schedule_b

8542310000

Screening_level

Automotive

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS13207/INFNS13207-1.pdf?hkey=52A5661711E402568146F3353EA87419

Watchdog

1

Maximum_speed

24 MHz

Eccn

EAR99

Бренд

Data_bus_width

8 Bit

Device_core

8051

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

JTAG/SPI/SSC/UART

Max_operating_supply_voltage

2.7, 5.5 V