MCU 8-bit STM8L STM8 CISC 64KB Flash 1.8V/2.5V/3.3V 80-Pin LQFP T/R

The high-density STM8L162x8 ultra-low-power devices feature an enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low-power operations.The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming.All high-density STM8L162x8 microcontrollers feature embedded data EEPROM and low-power low-voltage single-supply program Flash memory.The devices incorporate an extensive range of enhanced I/Os and peripherals, a 12-bit ADC, two DACs, two comparators, a real-time clock, AES, 8x40 or 4x44-segment LCD, four 16-bit timers, one 8-bit timer, as well as standard communication interfaces such as two SPIs, an I²C interface, and three USARTs. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

Operating conditions

Operating power supply: 1.65 to 3.6 V (without BOR), 1.8 to 3.6 V (with BOR)

Temp. range: -40 to 85, 105 or 125 °C

Low-power features

5 low-power modes: Wait, Low-power run, Low-power wait, Active-halt with full RTC, Halt

Ultra low leakage per I/0: 50 nA

Fast wake up from Halt mode: 5 µs

Advanced STM8 core

Harvard architecture and 3-stage pipeline

Max freq: 16 MHz, 16 CISC MIPS peak

Up to 40 external interrupt sources

Reset and supply management

Low-power, ultra safe BOR reset with five selectable thresholds

Ultra-low-power POR/PDR

Programmable voltage detector (PVD)

Clock management

32 kHz and 1-16 MHz crystal oscillators

Internal 16 MHz factory-trimmed RC and 38 kHz low consumption RC

Clock security system

Low-power RTC

BCD calendar with alarm interrupt,

Digital calibration with +/- 0.5ppm accuracy

LSE security system

Auto wake up from Halt w/periodic interrupt

Advanced anti-tamper detection

LCD: 8x40 or 4x44 w/ step-up converter

DMA

4 ch. for ADC, AES, DACs, SPIs, I²C, USARTs, Timers, 1 ch. for memory-to-memory

AES encryption hardware accelerator

2x12-bit DAC (dual mode) with output buffer

12-bit ADC up to 1 Msps/28 channels

Temp. sensor and internal ref. voltage

Memories

Up to 64 KB of Flash memory with up to 2 KB of data EEPROM with ECC and RWW

Flexible write/read protection modes

Up to 4 KB of RAM

2 ultra-low-power comparators

1 with fixed threshold and 1 rail to rail

Wake up capability

Timers

Three 16-bit timers with 2 channels (IC, OC, PWM), quadrature encoder

One 16-bit advanced control timer with 3 channels, supporting motor control

One 8-bit timer with 7-bit prescaler

One window, one independent watchdog

Beeper timer with 1, 2 or 4 kHz frequencies

Communication interfaces

Two synchronous serial interface (SPI)

Fast I²C 400 kHz SMBus and PMBus

Three USARTs (ISO 7816 interface + IrDA)

Up to 67 I/Os, all mappable on interrupt vectors

Up to 16 capacitive sensing channels supporting touchkey, proximity, linear touch and rotary touch sensors

Fast on-chip programming and non-intrusive debugging with SWIM, Bootloader using USART

96-bit unique ID