MCU 8-Bit PSoC M8C CISC 32KB Flash 1.8V/2.5V/3.3V/5V 48-Pin QFN EP Tray, CY8C20666A-24LTXI, Rochester Electronics

The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast CPU, Flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

  • Low power CapSense® block with SmartSense Auto-tuning
    • Patented CSA_EMC, CSD sensing algorithms
    • SmartSense_EMC Auto-Tuning
    • Sets and maintains optimal sensor performance during run time
    • Eliminates system tuning during development and production
    • Compensates for variations in manufacturing process Low average power consumption – 28 µA/sensor in run time (wake-up and scan once every 125 ms)
  • Powerful Harvard-architecture processor
    • M8C CPU with a max speed of 24 MHz
  • Operating Range: 1.71 V to 5.5 V
    • Standby Mode 1.1 µA (Typ)
    • Deep Sleep 0.1 µA (Typ)
  • Operating Temperature range: –40 °C to +85 °C
  • Flexible on-chip memory
    • 8 KB flash, 1 KB SRAM
    • 16 KB flash, 2 KB SRAM
    • 32 KB flash, 2 KB SRAM
    • Read while Write with EEPROM emulation
    • 50,000 flash erase/write cycles
    • In-system programming simplifies manufacturing process
  • Four Clock Sources
    • Internal main oscillator (IMO): 6/12/24 MHz
    • Internal low-speed oscillator (ILO) at 32 kHz for watchdog and sleep timers
    • External 32 KHz Crystal Oscillator
    • External Clock Input
  • Programmable pin configurations
    • Up to 36 general-purpose I/Os (GPIOs) configurable as buttons or sliders
    • Dual mode GPIO (Analog inputs and Digital I/O supported)
    • High sink current of 25 mA per GPIO
    • Max sink current 120 mA for all GPIOs
    • Source Current
    • 5 mA on ports 0 and 1
    • 1 mA on ports 2,3 and 4
    • Configurable internal pull-up, high-Z and open drain modes
    • Selectable, regulated digital I/O on port 1
    • Configurable input threshold on port 1
  • Versatile Analog functions
    • Internal analog bus supports connection of multiple sensors to form ganged proximity sensor
    • Internal Low-Dropout voltage regulator for high power supply rejection ratio (PSRR)
  • Full-Speed USB
    • 12 Mbps USB 2.0 compliant.

Характеристики

Analog_comparators

2

On_chip_adc

36-chx10-bit

Max_operating_supply_voltage

5.5 V

Watchdog

1

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0003061749/CYPR-S-A0003105928-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

2 KB

Program_memory_type

Flash

Program_memory_size

32 Kb

Product_dimensions

7 x 7 x 0.95(Max)

Pin_count

48

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 2.5, 3.3, 5 V

Number_of_timers

3

Бренд

Number_of_programmable_i_os

36

Msl_level

3

Mounting

Surface Mount

Maximum_speed

24 MHz

Max_processing_temp

260

Lead_finish

Gold Over Nickel Palladium

Тип интерфейса

I2C/SPI/USB

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

M8C

Data_bus_width

8 Bit

Country_of_origin

Taiwan

Min_operating_supply_voltage

1.71 V

Артикул: CY8C20666A-24LTXI

Описание

The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast CPU, Flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

  • Low power CapSense® block with SmartSense Auto-tuning
    • Patented CSA_EMC, CSD sensing algorithms
    • SmartSense_EMC Auto-Tuning
    • Sets and maintains optimal sensor performance during run time
    • Eliminates system tuning during development and production
    • Compensates for variations in manufacturing process Low average power consumption – 28 µA/sensor in run time (wake-up and scan once every 125 ms)
  • Powerful Harvard-architecture processor
    • M8C CPU with a max speed of 24 MHz
  • Operating Range: 1.71 V to 5.5 V
    • Standby Mode 1.1 µA (Typ)
    • Deep Sleep 0.1 µA (Typ)
  • Operating Temperature range: –40 °C to +85 °C
  • Flexible on-chip memory
    • 8 KB flash, 1 KB SRAM
    • 16 KB flash, 2 KB SRAM
    • 32 KB flash, 2 KB SRAM
    • Read while Write with EEPROM emulation
    • 50,000 flash erase/write cycles
    • In-system programming simplifies manufacturing process
  • Four Clock Sources
    • Internal main oscillator (IMO): 6/12/24 MHz
    • Internal low-speed oscillator (ILO) at 32 kHz for watchdog and sleep timers
    • External 32 KHz Crystal Oscillator
    • External Clock Input
  • Programmable pin configurations
    • Up to 36 general-purpose I/Os (GPIOs) configurable as buttons or sliders
    • Dual mode GPIO (Analog inputs and Digital I/O supported)
    • High sink current of 25 mA per GPIO
    • Max sink current 120 mA for all GPIOs
    • Source Current
    • 5 mA on ports 0 and 1
    • 1 mA on ports 2,3 and 4
    • Configurable internal pull-up, high-Z and open drain modes
    • Selectable, regulated digital I/O on port 1
    • Configurable input threshold on port 1
  • Versatile Analog functions
    • Internal analog bus supports connection of multiple sensors to form ganged proximity sensor
    • Internal Low-Dropout voltage regulator for high power supply rejection ratio (PSRR)
  • Full-Speed USB
    • 12 Mbps USB 2.0 compliant.

Детали

Analog_comparators

2

On_chip_adc

36-chx10-bit

Max_operating_supply_voltage

5.5 V

Watchdog

1

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0003061749/CYPR-S-A0003105928-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

2 KB

Program_memory_type

Flash

Program_memory_size

32 Kb

Product_dimensions

7 x 7 x 0.95(Max)

Pin_count

48

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 2.5, 3.3, 5 V

Number_of_timers

3

Бренд

Number_of_programmable_i_os

36

Msl_level

3

Mounting

Surface Mount

Maximum_speed

24 MHz

Max_processing_temp

260

Lead_finish

Gold Over Nickel Palladium

Тип интерфейса

I2C/SPI/USB

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

M8C

Data_bus_width

8 Bit

Country_of_origin

Taiwan

Min_operating_supply_voltage

1.71 V