Description
The PIC16LF707 is 40/44-Pin, Flash Microcontrollers with nanoWatt XLP and mTouch Technology.
- Only 35 Single-Word Instructions to Learn: – All single-cycle instructions except branches
- Operating Speed: – DC – 20 MHz clock input – DC – 200 ns instruction cycle
- 8K x 14 Words of Flash Program Memory
- 363 Bytes of Data Memory (SRAM)
- Interrupt Capability
- 8-Level Deep Hardware Stack
- Direct, Indirect and Relative Addressing modes
- Processor Read Access to Program Memory
- Pinout Compatible to other 40-pin PIC16CXXX and PIC16FXXX Microcontrollers Special Microcontroller Features:
- Precision Internal Oscillator: – 16 MHz or 500 kHz operation – Factory calibrated to ±1%, typical – Software selectable ÷1, ÷2, ÷4 or ÷8 divider
- 31 kHz Low-Power Internal Oscillator
- External Oscillator Block with: – 3 crystal/resonator modes up to 20 MHz – 3 external clock modes up to 20 MHz
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-Up Timer (OST)
- Brown-out Reset (BOR): – Selectable between two trip points – Disabled in Sleep option
- Watchdog Timer (WDT)
- Programmable Code Protection
- In-Circuit Serial Programming™ (ICSP™) via two pins
- In-Circuit Debug (ICD) via Two Pins
- Multiplexed Master Clear with Pull-up/Input Pin
- Industrial and Extended Temperature Range
- High-Endurance Flash Cell: – 1,000 Write Flash Endurance (typical) – Flash Retention: >40 years – Power-Saving Sleep mode
- Operating Voltage Range: – 1.8V to 3.6V (PIC16LF707)
- 1.8V to 5.5V (PIC16F707) Extreme Low-Power Management PIC16LF707 with nanoWatt XLP:
- Sleep mode: 20 nA @ 1.8V, typical
- Watchdog Timer: 500 nA @ 1.8V, typical
- Timer1 Oscillator: 600 nA @ 1.8V, typical @ 32 kHz mTouch™ Technology Features:
- Up to 32 Channels
- Two Capacitive Sensing modules: – Acquire 2 samples simultaneously
- Multiple Power modes: – Operation during Sleep – Proximity sensing with ultra low µA current
- Adjustable Waveform Min. and Max. for Optimal Noise Performance
- 1.8V to 5.5V Operation (3.6V max. for PIC16LF707) Analog Features:
- A/D Converter: – 8-bit resolution and up to 14 channels – Conversion available during Sleep – Selectable 1.024V/2.048V/4.096V voltage reference
- On-chip 3.2V Regulator (PIC16F707 device only) Peripheral Highlights:
- Up to 35 I/O Pins and 1 Input-only Pin: – High current source/sink for direct LED drive – Interrupt-on-pin change – Individually programmable weak pull-ups
- Timer0/A/B: 8-Bit Timer/Counter with 8-Bit Prescaler
- Enhanced Timer1/3: – Dedicated low-power 32 kHz oscillator driver – 16-bit timer/counter with prescaler – External Gate Input mode with toggle and single shot modes – Interrupt-on-gate completion
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Two Capture, Compare, PWM modules (CCP): – 16-bit Capture, max. resolution 12.5 ns – 16-bit Compare, max. resolution 200 ns – 10-bit PWM, max. frequency 20 kHz
- Addressable Universal Synchronous Asynchronous Receiver Transmitter (AUSART)
