MCU 8-bit PIC16 PIC RISC 1.5KB Flash 2.5V/3.3V/5V 20-Pin QFN EP Tube

The PIC16F527 device from Microchip Technology is a low-cost, high-performance, 8-bit, fully-static, Flashbased CMOS microcontroller. It employs a RISC architecture with only 36 single-word/single-cycle instructions. All instructions are single cycle except for program branches, which take two cycles. The PIC16F527 device delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly. The PIC16F527 product is equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are several oscillator configurations to choose from, including INTRC Internal Oscillator mode and the power-saving LP (Low-Power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.

  • Brown-out Reset (BOR)
  • Power-on Reset (POR)
  • Device Reset Timer (DRT)
  • Watchdog Timer (WDT) with a Dedicated RC Oscillator
  • Programmable Code Protection (CP)
  • Power-Saving Sleep mode with Wake-up on Change Feature
  • Selectable Oscillator Options: – INTOSC: Precision 4 or 8 MHz internal oscillator – EXTRC: Low-cost external RC oscillator – LP: Power-saving, low-frequency crystal – XT: Standard crystal/resonator – HS: High-speed crystal/resonator – EC: High-speed external clock
  • Variety of Packaging Options: – 20-Lead PDIP, SOIC, SSOP, QFN, UQFN CMOS Technology:
  • Low-Power, High-Speed CMOS Flash Technology
  • Fully-Static Design
  • Wide Operating Voltage and Temperature Range: – Industrial: 2.0V to 5.5V – Extended: 2.0V to 5.5V
  • Operating Current: – 170 uA @ 2V, 4 MHz, typical – 15 uA @ 2V, 32 kHz, typical
  • Standby Current: – 100 nA @ 2V, typical

Характеристики

Бренд

Pin_count

20

Min_operating_supply_voltage

2 V

Max_operating_supply_voltage

5.5 V

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0001490992/MCHP-S-A0001490992-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended

Schedule_b

8542310000

Ram_size

68 byte

Program_memory_type

Flash

Program_memory_size

1.5 Kb

Product_dimensions

4 x 4 x 0.88 mm

Operating_temperature

-40 to 125 °C

Country_of_origin

China

Operating_supply_voltage

2.5, 3.3, 5 V

On_chip_adc

8-chx8-bit

Number_of_timers

1

Number_of_programmable_i_os

17

Mounting

Surface Mount

Maximum_speed

20 MHz

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

PIC

Max_power_dissipation

700 mW

Артикул: PIC16F527-E/ML

Описание

The PIC16F527 device from Microchip Technology is a low-cost, high-performance, 8-bit, fully-static, Flashbased CMOS microcontroller. It employs a RISC architecture with only 36 single-word/single-cycle instructions. All instructions are single cycle except for program branches, which take two cycles. The PIC16F527 device delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly. The PIC16F527 product is equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are several oscillator configurations to choose from, including INTRC Internal Oscillator mode and the power-saving LP (Low-Power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.

  • Brown-out Reset (BOR)
  • Power-on Reset (POR)
  • Device Reset Timer (DRT)
  • Watchdog Timer (WDT) with a Dedicated RC Oscillator
  • Programmable Code Protection (CP)
  • Power-Saving Sleep mode with Wake-up on Change Feature
  • Selectable Oscillator Options: – INTOSC: Precision 4 or 8 MHz internal oscillator – EXTRC: Low-cost external RC oscillator – LP: Power-saving, low-frequency crystal – XT: Standard crystal/resonator – HS: High-speed crystal/resonator – EC: High-speed external clock
  • Variety of Packaging Options: – 20-Lead PDIP, SOIC, SSOP, QFN, UQFN CMOS Technology:
  • Low-Power, High-Speed CMOS Flash Technology
  • Fully-Static Design
  • Wide Operating Voltage and Temperature Range: – Industrial: 2.0V to 5.5V – Extended: 2.0V to 5.5V
  • Operating Current: – 170 uA @ 2V, 4 MHz, typical – 15 uA @ 2V, 32 kHz, typical
  • Standby Current: – 100 nA @ 2V, typical

Детали

Бренд

Pin_count

20

Min_operating_supply_voltage

2 V

Max_operating_supply_voltage

5.5 V

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0001490992/MCHP-S-A0001490992-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended

Schedule_b

8542310000

Ram_size

68 byte

Program_memory_type

Flash

Program_memory_size

1.5 Kb

Product_dimensions

4 x 4 x 0.88 mm

Operating_temperature

-40 to 125 °C

Country_of_origin

China

Operating_supply_voltage

2.5, 3.3, 5 V

On_chip_adc

8-chx8-bit

Number_of_timers

1

Number_of_programmable_i_os

17

Mounting

Surface Mount

Maximum_speed

20 MHz

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

PIC

Max_power_dissipation

700 mW