MCU 8-bit PIC12 PIC RISC 1.5KB Flash 2.5V/3.3V/5V 8-Pin DFN EP Tube, PIC12F510T-I/MC, Microchip

The PIC12F510 devices are low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle except for program branches, which take two cycles. The PIC12F510 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to-remember instruction set reduces development time significantly.The PIC12F510 products are equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from (six on the PIC16F506), including INTOSC Internal Oscillator mode and the Power-Saving LP (Low-power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.The PIC12F510 products are supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a "C" compiler, a low-cost development programmer and a full featured programmer. All the tools are supported on IBM PC and compatible machines.

  • Only 33 Single-Word Instructions to Learn
  • All Single-Cycle Instructions except for Program Branches, which are Two-Cycle
  • 12-Bit Wide Instructions
  • Two-Level Deep Hardware Stack
  • Direct, Indirect and Relative Addressing modes for Data and Instructions
  • 8-Bit Wide Data Path
  • 10 Special Function Hardware Registers
  • Operating Speed:
    • DC – 20 MHz Crystal Oscillator
    • 200 ns instruction cycle
  • 4 or 8 MHz Selectable Precision Internal Oscillator:
    • Factory calibrated to ±1%
  • In-Circuit Serial Programming™ (ICSP™)
  • In-Circuit Debugging (ICD) Support
  • Power-on Reset (POR)
  • Device Reset Timer (DRT):
    • Short DRT (1.125 ms, typical) for INTOSC, EXTRC and EC
    • DRT (18 ms, typical) for HS, XT and LP
  • Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
  • Programmable Code Protection
  • Multiplexed MCLR Input Pin
  • Selectable Internal Weak Pull-Ups on I/O Pins
  • Power-Saving Sleep mode
  • Wake-up from Sleep on Pin Change
  • Wake-up from Sleep on Comparator Change
  • Tape and Reel Packaging

Характеристики

Бренд

Operating_temperature

-40 to 85 °C

Max_power_dissipation

700 mW

Min_operating_supply_voltage

2 V

Max_operating_supply_voltage

5.5 V

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS02506/MCHPS02506-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

38 byte

Program_memory_type

Flash

Program_memory_size

1.5 Kb

Product_dimensions

2 x 3 x 0.88 mm

Pin_count

8

Operating_supply_voltage

2.5, 3.3, 5 V

Country_of_origin

China

On_chip_adc

3-chx8-bit

Number_of_timers

1

Number_of_programmable_i_os

6

Msl_level

1

Mounting

Surface Mount

Maximum_speed

8 MHz

Max_processing_temp

260

Lead_finish

Matte Tin

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

PIC

Max_expanded_memory_size

3 KB

Артикул: PIC12F510T-I/MC

Описание

The PIC12F510 devices are low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle except for program branches, which take two cycles. The PIC12F510 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to-remember instruction set reduces development time significantly.The PIC12F510 products are equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from (six on the PIC16F506), including INTOSC Internal Oscillator mode and the Power-Saving LP (Low-power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.The PIC12F510 products are supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a "C" compiler, a low-cost development programmer and a full featured programmer. All the tools are supported on IBM PC and compatible machines.

  • Only 33 Single-Word Instructions to Learn
  • All Single-Cycle Instructions except for Program Branches, which are Two-Cycle
  • 12-Bit Wide Instructions
  • Two-Level Deep Hardware Stack
  • Direct, Indirect and Relative Addressing modes for Data and Instructions
  • 8-Bit Wide Data Path
  • 10 Special Function Hardware Registers
  • Operating Speed:
    • DC – 20 MHz Crystal Oscillator
    • 200 ns instruction cycle
  • 4 or 8 MHz Selectable Precision Internal Oscillator:
    • Factory calibrated to ±1%
  • In-Circuit Serial Programming™ (ICSP™)
  • In-Circuit Debugging (ICD) Support
  • Power-on Reset (POR)
  • Device Reset Timer (DRT):
    • Short DRT (1.125 ms, typical) for INTOSC, EXTRC and EC
    • DRT (18 ms, typical) for HS, XT and LP
  • Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
  • Programmable Code Protection
  • Multiplexed MCLR Input Pin
  • Selectable Internal Weak Pull-Ups on I/O Pins
  • Power-Saving Sleep mode
  • Wake-up from Sleep on Pin Change
  • Wake-up from Sleep on Comparator Change
  • Tape and Reel Packaging

Детали

Бренд

Operating_temperature

-40 to 85 °C

Max_power_dissipation

700 mW

Min_operating_supply_voltage

2 V

Max_operating_supply_voltage

5.5 V

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS02506/MCHPS02506-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

38 byte

Program_memory_type

Flash

Program_memory_size

1.5 Kb

Product_dimensions

2 x 3 x 0.88 mm

Pin_count

8

Operating_supply_voltage

2.5, 3.3, 5 V

Country_of_origin

China

On_chip_adc

3-chx8-bit

Number_of_timers

1

Number_of_programmable_i_os

6

Msl_level

1

Mounting

Surface Mount

Maximum_speed

8 MHz

Max_processing_temp

260

Lead_finish

Matte Tin

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

PIC

Max_expanded_memory_size

3 KB