Описание
The ML610Q793 is a high-performance 8-bit low power microcontroller optimized for sensor hub, that integrates LAPIS Semiconductor’s original high-performance 8-bit CPU core with a 16-bit multiplier/divider co-processor, 64 KByte flash memory, 4 KByte RAM, multiple interfaces for various sensors and host interfaces with 8KByte logging RAM in small footprint package. The ML610Q793 is an ideal sensor hub microcontroller for smart phone to separate various sensors off from its application processor and control them effectively for reducing total system power consumption.
- 8-bit RISC CPU (CPU name: uX-U8/100)
- 16-bit length instruction system
- Minimum instruction execution time 30.5 us (32.768 kHz system clock) 0.25 us (4.096 MHz system clock)
- Built-in coprocessor for multiplication, division, and multiply-accumulate operations Multiplication (Input: 16-bit x 16-bit, Output: 32-bit) Division (Input: 32-bit/16-bit, Output: 32-bit) Multiply-accumulate (Input: 16-bit x 16-bit + 32-bit, Output: 32-bit)
- Internal memory
- 64KByte Flash ROM (32KWord x 16-bit)
- 4KByte SRAM (4KWord x 8-bit)
- Interrupt controller
- Non-maskable interrupt: 1 source
- Maskable interrupt: 29 sources Number of internal sources: 13 (Timer: 6, ADC: 1, SPI: 1, I2C: 1, HOSTIF: 1, Arithmetic circuit: 1, UART: 1, SIO: 1) Number of external sources: 16
- Timer
- 8 bits timer x 6 ch (also 16 bits x 3ch configuration is available by using Timer 0 and 1, Timer 2 and 3, or Timer 4 and 5)
- Watchdog timer (WDT) x 1ch
- Serial interface
- SPI interface with master function x 1ch
- I2C interface with master function x 1ch
- UART interface (two-wire, full duplex communication) x 1ch
- SIO interface (two-wire, half-duplex communication) x 1ch
- Host interface
- Serial interface with slave function (SPI/I2C selectable) x 1ch
- Host processor interrupt
- 8KByte RAM for logging FEDL610Q793-02 ML610Q793 2/24
- General-purpose I/O port
- 8-bit input/output port x 2ch
- 5-bit input/output port x 1ch
- A/D converter
- 12-bit successive approximation type A/D converter x 3ch
- Arithmetic circuit
- Root operation (Input: 18 bit, Output: 19 bit)
- Power consumption control function
- CPU operation mode Supports high frequency operation and low frequency operation
- HALT mode Supports the HALT mode for stopping CPU only Returning for HALT mode : 77usec
- Input clock
- 32.768 kHz (External clock input)
- Power supply voltage
- Analog section:(using ADC) 2.5V to 3.6V (not using ADC) 1.7V to 1.9V
- Digital I/O section: 1.7V to 1.9V
- Digital core section: 1.7V to 1.9V
- Power consumption
- High-speed operation (4.096MHz): 0.93mA
- HALT Mode: 0.6uA
- Operating frequency
- High-speed clock: 4.096 MHz
- Low-speed clock: 32.768kHz
- Operating temperature
- Ambient temperature: -30 °C to +85 °C (FLASH erase/programming -30 °C to +60 °C)
- Package
- 48-pin WL-CSP (S-UFLGA48-3.06×2.96-0.40-W)
