Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 8-bit HC08 CISC 16KB Flash 3.3V/5V 32-Pin LQFP Brick, MC908JL16CFJE, NXP

The DEMO908JL16 is an evaluation or demonstration board for the MC908JL16 microcontroller. Development of application code is quick and easy with the integrated USB-to-MON08 interface, CodeWarrior Development Studio, and software examples. A I/O connector allows connecting the DEMO908JL16 board to an expanded evaluation environment.

  • An MCU section containing
    • An MC68HC908JL16 microcontroller (in 32–pin SDIP package, already programmed with a demo application–in addition, you can also use any other pinto–pin–compatible device)
    • One clock sources: a 9.8304 MHz crystal, selectable via the “OSC ENA” jumper.
  • A power supply section containing
    • A 12 V DC Power Supply Input Connector
    • Power input selection jumpers for selecting the input voltage input source
      • 12 V DC input connector
      • USB connector
      • I/O header connector
  • A built–in “USB TO MON08” section which allows the host PC to communicate with the microcontroller through a standard USB interface. USB 2.0 is fully supported. When using an external in-circuit debugger (via the “MON08” connector), the “USB TO MON08” circuitry must be bypassed by removing all of the J402 jumper
  • A Reset section containing a Reset push-button connected to the MCU Reset pin
  • An input section containing
    • Two push–buttons together with jumpers to connect/disconnect them to/from the PTA0 and PTA1 pins of the microcontroller
    • A potentiometer, together with a jumper to connect/disconnect it to/from the PTD3/ADC8 pin of the microcontroller
  • An output section containing two high–efficiency (low–current) LEDs together with two jumpers to connect/disconnect them to/from the PTD4 and PTD5 pins of the microcontroller.
  • An RS–232 section providing one RS–232 channel connected to the microcontroller’s SCI serial communication interface. The microcontroller’s PTD6/TxD and PTD7/RxD lines are used by the RS–232 channel.
  • An accelerometer section featuring a Freescale MMA7260Q sensor. All of the sensor’s input/output lines are connected to the microcontroller via jumpers.

    • Характеристики

    Бренд

    Operating_supply_voltage

    3.3, 5 V
    Min_operating_supply_voltage

    2.7 V
    Max_operating_supply_voltage

    5.5 V
    Supplier_package

    LQFP
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0002317017/PHGL-S-A0002317017-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Schedule_b

    8542310000
    Ram_size

    512 byte
    Program_memory_type

    Flash
    Program_memory_size

    16 KB
    Product_dimensions

    7 x 7 x 1.45 mm
    Pin_count

    32
    Operating_temperature

    -40 to 85 °C
    On_chip_adc

    13-chx10-bit
    Country_of_origin

    China
    Number_of_timers

    4
    Number_of_programmable_i_os

    26
    Msl_level

    3
    Mounting

    Surface Mount
    Maximum_speed

    8 MHz
    Max_processing_temp

    260
    Lead_finish

    Matte Tin
    Тип интерфейса

    I2C/SCI
    Instruction_set_architecture

    CISC
    Htsn

    8542310001
    Eccn

    EAR99
    Data_bus_width

    8 Bit
    Max_expanded_memory_size

    64 KB
    Артикул: MC908JL16CFJE

    Описание

    The DEMO908JL16 is an evaluation or demonstration board for the MC908JL16 microcontroller. Development of application code is quick and easy with the integrated USB-to-MON08 interface, CodeWarrior Development Studio, and software examples. A I/O connector allows connecting the DEMO908JL16 board to an expanded evaluation environment.

  • An MCU section containing
    • An MC68HC908JL16 microcontroller (in 32–pin SDIP package, already programmed with a demo application–in addition, you can also use any other pinto–pin–compatible device)
    • One clock sources: a 9.8304 MHz crystal, selectable via the “OSC ENA” jumper.
  • A power supply section containing
    • A 12 V DC Power Supply Input Connector
    • Power input selection jumpers for selecting the input voltage input source
      • 12 V DC input connector
      • USB connector
      • I/O header connector
  • A built–in “USB TO MON08” section which allows the host PC to communicate with the microcontroller through a standard USB interface. USB 2.0 is fully supported. When using an external in-circuit debugger (via the “MON08” connector), the “USB TO MON08” circuitry must be bypassed by removing all of the J402 jumper
  • A Reset section containing a Reset push-button connected to the MCU Reset pin
  • An input section containing
    • Two push–buttons together with jumpers to connect/disconnect them to/from the PTA0 and PTA1 pins of the microcontroller
    • A potentiometer, together with a jumper to connect/disconnect it to/from the PTD3/ADC8 pin of the microcontroller
  • An output section containing two high–efficiency (low–current) LEDs together with two jumpers to connect/disconnect them to/from the PTD4 and PTD5 pins of the microcontroller.
  • An RS–232 section providing one RS–232 channel connected to the microcontroller’s SCI serial communication interface. The microcontroller’s PTD6/TxD and PTD7/RxD lines are used by the RS–232 channel.
  • An accelerometer section featuring a Freescale MMA7260Q sensor. All of the sensor’s input/output lines are connected to the microcontroller via jumpers.

    • Детали

    Бренд

    Operating_supply_voltage

    3.3, 5 V
    Min_operating_supply_voltage

    2.7 V
    Max_operating_supply_voltage

    5.5 V
    Supplier_package

    LQFP
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0002317017/PHGL-S-A0002317017-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Schedule_b

    8542310000
    Ram_size

    512 byte
    Program_memory_type

    Flash
    Program_memory_size

    16 KB
    Product_dimensions

    7 x 7 x 1.45 mm
    Pin_count

    32
    Operating_temperature

    -40 to 85 °C
    On_chip_adc

    13-chx10-bit
    Country_of_origin

    China
    Number_of_timers

    4
    Number_of_programmable_i_os

    26
    Msl_level

    3
    Mounting

    Surface Mount
    Maximum_speed

    8 MHz
    Max_processing_temp

    260
    Lead_finish

    Matte Tin
    Тип интерфейса

    I2C/SCI
    Instruction_set_architecture

    CISC
    Htsn

    8542310001
    Eccn

    EAR99
    Data_bus_width

    8 Bit
    Max_expanded_memory_size

    64 KB

    Похожие товары