MCU 8-bit HC08 CISC 16KB Flash 3.3V/5V 28-Pin PDIP Rail, MC908JL16CPE, NXP

The DEMO908JL16 is an evaluation or demonstration board for the MC908JL16 microcontroller. Development of application code is quick and easy with the integrated USB-to-MON08 interface, CodeWarrior Development Studio, and software examples. A I/O connector allows connecting the DEMO908JL16 board to an expanded evaluation environment.

An MCU section containing

An MC68HC908JL16 microcontroller (in 32–pin SDIP package, already programmed with a demo application–in addition, you can also use any other pinto–pin–compatible device)
One clock sources: a 9.8304 MHz crystal, selectable via the “OSC ENA” jumper.

A power supply section containing

A 12 V DC Power Supply Input Connector
Power input selection jumpers for selecting the input voltage input source
- 12 V DC input connector
- USB connector
- I/O header connector

A built–in “USB TO MON08” section which allows the host PC to communicate with the microcontroller through a standard USB interface. USB 2.0 is fully supported. When using an external in-circuit debugger (via the “MON08” connector), the “USB TO MON08” circuitry must be bypassed by removing all of the J402 jumper

A Reset section containing a Reset push-button connected to the MCU Reset pin

An input section containing

Two push–buttons together with jumpers to connect/disconnect them to/from the PTA0 and PTA1 pins of the microcontroller
A potentiometer, together with a jumper to connect/disconnect it to/from the PTD3/ADC8 pin of the microcontroller

An output section containing two high–efficiency (low–current) LEDs together with two jumpers to connect/disconnect them to/from the PTD4 and PTD5 pins of the microcontroller.

An RS–232 section providing one RS–232 channel connected to the microcontroller’s SCI serial communication interface. The microcontroller’s PTD6/TxD and PTD7/RxD lines are used by the RS–232 channel.

An accelerometer section featuring a Freescale MMA7260Q sensor. All of the sensor’s input/output lines are connected to the microcontroller via jumpers.

Характеристики

Бренд	NXP
Country_of_origin	United States
Data_bus_width	8 Bit
Eccn	EAR99
Htsn	8542310001
Instruction_set_architecture	CISC
Тип интерфейса	I2C/SCI
Lead_finish	Matte Tin
Maximum_speed	8 MHz
Mounting	Through Hole
Number_of_programmable_i_os	23
Number_of_timers	4
On_chip_adc	12-chx10-bit
Operating_supply_voltage	3.3, 5 V
Operating_temperature	-40 to 85 °C
Pin_count	28
Product_dimensions	37.21 x 14.22 x 4.06 mm
Program_memory_size	16 KB
Program_memory_type	Flash
Ram_size	512 byte
Schedule_b	8542390000
Specifications	https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGL-S-A0002317017/PHGL-S-A0002317017-1.pdf?hkey=52A5661711E402568146F3353EA87419
Supplier_package	PDIP
Max_operating_supply_voltage	5.5 V
Min_operating_supply_voltage	2.7 V
Max_expanded_memory_size	64 KB

Артикул: MC908JL16CPE

Описание