Описание
The CY7C64113C are 8-bit One Time Programmable microcontrollers that are designed for full-speed USB applications. The instruction set has been optimized specifically for USB operations, although the microcontrollers can be used for a variety of non-USB embedded applications.
- Full-speed USB Microcontroller
- 8-bit USB Optimized Microcontroller
- Harvard architecture
- 6-MHz external clock source
- 12-MHz internal CPU clock
- 48-MHz internal clock
- Internal memory
- 256 bytes of RAM
- 8 KB of PROM (CY7C64113C)
- Integrated Master/Slave I²C-compatible Controller (100 kHz) enabled through General-Purpose I/O (GPIO) pins
- Hardware Assisted Parallel Interface (HAPI) for data transfer to external devices
- I/O ports
- Three GPIO ports (Port 0 to 2) capable of sinking 7 mA per pin (typical)
- An additional GPIO port (Port 3) capable of sinking 12 mA per pin (typical) for high current requirements: LEDs
- Higher current drive achievable by connecting multiple GPIO pins together to drive a common output
- Each GPIO port can be configured as inputs with internal pull-ups or open drain outputs or traditional CMOS outputs
- A Digital to Analog Conversion (DAC) port with programmable current sink outputs is available on the CY7C64113C devices
- Maskable interrupts on all I/O pins
- 12-bit free-running timer with one microsecond clock ticks
- Watchdog Timer (WDT)
- Internal Power-On Reset (POR)
- USB Specification Compliance
- Conforms to USB Specification, Version 1.1
- Conforms to USB HID Specification, Version 1.1
- Supports up to five user configured endpoints
- Up to four 8-byte data endpoints
- Up to two 32-byte data endpoints
- Integrated USB transceivers
- Improved output drivers to reduce EMI
- Operating voltage from 4.0 V to 5.5 V dc
- Operating temperature from 0 to 70 degrees Celsius
- CY7C64113C available in 48-pin SSOP packages
- Industry-standard programmer support
