MCU 8-bit COP8 CISC 8KB Flash 3.3V/5V 48-Pin TSSOP Rail, COP8CCE9IMT9, Texas Instruments

The COP8CBE9/CCE9 Flash microcontrollers are highly integratedCOP8 Feature core devices, with 8k Flash memory and advanced features including Virtual EEPROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.

KEY FEATURES

  • 8k bytes Flash Program Memory with Security Feature
  • Virtual EEPROM using Flash Program Memory
  • 256byte volatile RAM
  • 10-bit Successive Approximation Analog to Digital Converter (up to 16 channels)
  • 100% Precise Analog Emulation
  • USART with Onchip Baud Benerator
  • 2.7V – 5.5V In-System Programmability of Flash
  • High endurance -100k Read/Write Cycles
  • Superior Data Retention – 100 years
  • Dual Clock Operation with HALT/IDLE Power Save Modes
  • Two 16-bit timers:
    • Timer T2 can operate at high speed (50 ns resolution)
    • Processor Independent PWM mode
    • External Event counter mode
    • Input Capture mode
  • Brown-out Reset
  • High Current I/Os
    • B0–B3: 10 mA @ 0.3V
    • All others: 10 mA @ 1.0V
  • OTHER FEATURES

  • Single Supply Operation:
    • 2.7V–5.5V (0°C to +70°C)
    • 4.5V–5.5V (-40°C to +125°C)
  • Quiet Design (low radiated emissions)
  • Multi-Input Wake-up with optional interrupts
  • MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
  • Clock Doubler
    • 20 MHz operation from 10 MHz Oscillator (COP8CCE9) with 0.5 µs Instruction Cycle
    • 6.67 MHz operation from 3.33 MHz Oscillator (COP8CBE9) with 1.5 µs Instruction Cycle
  • Eleven Multi-source Vectored Interrupts Servicing:
    • External Interrupt
    • USART (2)
    • Idle Timer T0
    • Two Timers (each with 2 interrupts)
    • MICROWIRE/PLUS Serial peripheral interface
    • Multi-Input Wake-up
    • Software Trap
  • Idle Timer with programmable interrupt interval
  • 8-bit Stack Pointer SP (stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True bit manipulation
  • WATCHDOG and Clock Monitor logic
  • Software selectable I/O options
    • TRI-STATE Output/High Impedance Input
    • Push-Pull Output
    • Weak Pull Up Input
  • Schmitt trigger inputs on I/O ports
  • Temperature range: 0°C to +70°C and –40°C to +125°C (COP8CCE9)
  • Packaging: 44 PLCC, 44 WQFN and 48 TSSOP
  • Характеристики

    Бренд

    On_chip_adc

    16-chx10-bit

    Max_operating_supply_voltage

    5.5 V

    Supplier_package

    TSSOP

    Specifications

    http://www.ti.com/lit/ds/symlink/cop8cce9.pdf

    Schedule_b

    8542310000

    Ram_size

    256 byte

    Program_memory_type

    Flash

    Program_memory_size

    8 KB

    Product_dimensions

    12.5 x 6.1 x 0.9 mm

    Pin_count

    48

    Operating_temperature

    0 to 70 °C

    Operating_supply_voltage

    3.3, 5 V

    Number_of_timers

    2

    Country_of_origin

    United States

    Number_of_programmable_i_os

    37

    Msl_level

    2

    Mounting

    Surface Mount

    Maximum_speed

    10 MHz

    Max_processing_temp

    235

    Lead_finish

    Tin/Lead

    Тип интерфейса

    SPI/USART

    Instruction_set_architecture

    CISC

    Htsn

    8542310001

    Eccn

    EAR99

    Data_bus_width

    8 Bit

    Min_operating_supply_voltage

    2.7 V

    SKU: COP8CCE9IMT9

    Description

    The COP8CBE9/CCE9 Flash microcontrollers are highly integratedCOP8 Feature core devices, with 8k Flash memory and advanced features including Virtual EEPROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.

    KEY FEATURES

  • 8k bytes Flash Program Memory with Security Feature
  • Virtual EEPROM using Flash Program Memory
  • 256byte volatile RAM
  • 10-bit Successive Approximation Analog to Digital Converter (up to 16 channels)
  • 100% Precise Analog Emulation
  • USART with Onchip Baud Benerator
  • 2.7V – 5.5V In-System Programmability of Flash
  • High endurance -100k Read/Write Cycles
  • Superior Data Retention – 100 years
  • Dual Clock Operation with HALT/IDLE Power Save Modes
  • Two 16-bit timers:
    • Timer T2 can operate at high speed (50 ns resolution)
    • Processor Independent PWM mode
    • External Event counter mode
    • Input Capture mode
  • Brown-out Reset
  • High Current I/Os
    • B0–B3: 10 mA @ 0.3V
    • All others: 10 mA @ 1.0V
  • OTHER FEATURES

  • Single Supply Operation:
    • 2.7V–5.5V (0°C to +70°C)
    • 4.5V–5.5V (-40°C to +125°C)
  • Quiet Design (low radiated emissions)
  • Multi-Input Wake-up with optional interrupts
  • MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
  • Clock Doubler
    • 20 MHz operation from 10 MHz Oscillator (COP8CCE9) with 0.5 µs Instruction Cycle
    • 6.67 MHz operation from 3.33 MHz Oscillator (COP8CBE9) with 1.5 µs Instruction Cycle
  • Eleven Multi-source Vectored Interrupts Servicing:
    • External Interrupt
    • USART (2)
    • Idle Timer T0
    • Two Timers (each with 2 interrupts)
    • MICROWIRE/PLUS Serial peripheral interface
    • Multi-Input Wake-up
    • Software Trap
  • Idle Timer with programmable interrupt interval
  • 8-bit Stack Pointer SP (stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True bit manipulation
  • WATCHDOG and Clock Monitor logic
  • Software selectable I/O options
    • TRI-STATE Output/High Impedance Input
    • Push-Pull Output
    • Weak Pull Up Input
  • Schmitt trigger inputs on I/O ports
  • Temperature range: 0°C to +70°C and –40°C to +125°C (COP8CCE9)
  • Packaging: 44 PLCC, 44 WQFN and 48 TSSOP
  • Additional information

    Бренд

    On_chip_adc

    16-chx10-bit

    Max_operating_supply_voltage

    5.5 V

    Supplier_package

    TSSOP

    Specifications

    http://www.ti.com/lit/ds/symlink/cop8cce9.pdf

    Schedule_b

    8542310000

    Ram_size

    256 byte

    Program_memory_type

    Flash

    Program_memory_size

    8 KB

    Product_dimensions

    12.5 x 6.1 x 0.9 mm

    Pin_count

    48

    Operating_temperature

    0 to 70 °C

    Operating_supply_voltage

    3.3, 5 V

    Number_of_timers

    2

    Country_of_origin

    United States

    Number_of_programmable_i_os

    37

    Msl_level

    2

    Mounting

    Surface Mount

    Maximum_speed

    10 MHz

    Max_processing_temp

    235

    Lead_finish

    Tin/Lead

    Тип интерфейса

    SPI/USART

    Instruction_set_architecture

    CISC

    Htsn

    8542310001

    Eccn

    EAR99

    Data_bus_width

    8 Bit

    Min_operating_supply_voltage

    2.7 V