MCU 8-Bit ATmega AVR RISC 16KB Flash 3.3V/5V 64-Pin VQFN EP, ATMEGA165P-16MN, Microchip

The ATmega165P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega165P achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

  • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller
  • Advanced RISC Architecture
    • 130 Powerful Instructions – Most Single Clock Cycle Execution
    • 32 × 8 General Purpose Working Registers
    • Fully Static Operation
    • Up to 16 MIPS Throughput at 16 MHz
    • On-Chip 2-cycle Multiplier
  • High Endurance Non-volatile Memory segments
    • 16 Kbytes of In-System Self-programmable Flash program memory
    • 512 Bytes EEPROM
    • 1 Kbytes Internal SRAM
    • Write/Erase cyles: 10,000 Flash/100,000 EEPROM(1)(3)
    • Data retention: 20 years at 85°C/100 years at 25°C(2)(3)
    • Optional Boot Code Section with Independent Lock Bits
    • In-System Programming by On-chip Boot Program
    • True Read-While-Write Operation
    • Programming Lock for Software Security
  • JTAG (IEEE std. 1149.1 compliant) Interface
    • Boundary-scan Capabilities According to the JTAG Standard
    • Extensive On-chip Debug Support
    • Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
  • Peripheral Features
    • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
    • Real Time Counter with Separate Oscillator
    • Four PWM Channels
    • 8-channel, 10-bit ADC
    • Programmable Serial USART
    • Master/Slave SPI Serial Interface
    • Universal Serial Interface with Start Condition Detector
    • Programmable Watchdog Timer with Separate On-chip Oscillator
    • On-chip Analog Comparator
    • Interrupt and Wake-up on Pin Change
  • Special Microcontroller Features
    • Power-on Reset and Programmable Brown-out Detection
    • Internal Calibrated Oscillator
    • External and Internal Interrupt Sources
    • Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby
  • I/O and Packages
    • 54 Programmable I/O Lines
    • 64-lead TQFP and 64-pad QFN/MLF
  • Speed Grade:
    • ATmega165PV: 0 – 4 MHz @ 1.8V – 5.5V, 0 – 8 MHz @ 2.7V – 5.5V
    • ATmega165P: 0 – 8 MHz @ 2.7V – 5.5V, 0 – 16 MHz @ 4.5V – 5.5V
  • Temperature range:
    • -40°C to 85°C Industrial
  • Ultra-Low Power Consumption
    • Active Mode:
    • 1 MHz, 1.8V: 330 µA
    • 32 kHz, 1.8V: 10 µA (including Oscillator)
    • Power-down Mode:
    • 0.1 µA at 1.8V
    • Power-save Mode:
    • 0.6 µA at 1.8V(Including 32 kHz RTC)

Характеристики

Analog_comparators

1

Operating_supply_voltage

3.3, 5 V

Max_operating_supply_voltage

5.5 V

Watchdog

1

Supplier_package

VQFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0009590839/MCHP-S-A0009590839-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

1 KB

Program_memory_type

Flash

Program_memory_size

2 KB

Product_dimensions

9 x 9 x 0.88 mm

Pin_count

64

Operating_temperature

-40 to 105 °C

On_chip_adc

8-chx10-bit

Бренд

Number_of_timers

3

Number_of_programmable_i_os

54

Mounting

Surface Mount

Maximum_speed

16 MHz

Lead_finish

Matte Tin

Тип интерфейса

SPI/USART

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

AVR

Data_memory_size

512 byte

Data_bus_width

8 Bit

Country_of_origin

China

Min_operating_supply_voltage

2.7 V

Артикул: ATMEGA165P-16MN

Описание

The ATmega165P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega165P achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

  • High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller
  • Advanced RISC Architecture
    • 130 Powerful Instructions – Most Single Clock Cycle Execution
    • 32 × 8 General Purpose Working Registers
    • Fully Static Operation
    • Up to 16 MIPS Throughput at 16 MHz
    • On-Chip 2-cycle Multiplier
  • High Endurance Non-volatile Memory segments
    • 16 Kbytes of In-System Self-programmable Flash program memory
    • 512 Bytes EEPROM
    • 1 Kbytes Internal SRAM
    • Write/Erase cyles: 10,000 Flash/100,000 EEPROM(1)(3)
    • Data retention: 20 years at 85°C/100 years at 25°C(2)(3)
    • Optional Boot Code Section with Independent Lock Bits
    • In-System Programming by On-chip Boot Program
    • True Read-While-Write Operation
    • Programming Lock for Software Security
  • JTAG (IEEE std. 1149.1 compliant) Interface
    • Boundary-scan Capabilities According to the JTAG Standard
    • Extensive On-chip Debug Support
    • Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
  • Peripheral Features
    • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
    • Real Time Counter with Separate Oscillator
    • Four PWM Channels
    • 8-channel, 10-bit ADC
    • Programmable Serial USART
    • Master/Slave SPI Serial Interface
    • Universal Serial Interface with Start Condition Detector
    • Programmable Watchdog Timer with Separate On-chip Oscillator
    • On-chip Analog Comparator
    • Interrupt and Wake-up on Pin Change
  • Special Microcontroller Features
    • Power-on Reset and Programmable Brown-out Detection
    • Internal Calibrated Oscillator
    • External and Internal Interrupt Sources
    • Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby
  • I/O and Packages
    • 54 Programmable I/O Lines
    • 64-lead TQFP and 64-pad QFN/MLF
  • Speed Grade:
    • ATmega165PV: 0 – 4 MHz @ 1.8V – 5.5V, 0 – 8 MHz @ 2.7V – 5.5V
    • ATmega165P: 0 – 8 MHz @ 2.7V – 5.5V, 0 – 16 MHz @ 4.5V – 5.5V
  • Temperature range:
    • -40°C to 85°C Industrial
  • Ultra-Low Power Consumption
    • Active Mode:
    • 1 MHz, 1.8V: 330 µA
    • 32 kHz, 1.8V: 10 µA (including Oscillator)
    • Power-down Mode:
    • 0.1 µA at 1.8V
    • Power-save Mode:
    • 0.6 µA at 1.8V(Including 32 kHz RTC)

Детали

Analog_comparators

1

Operating_supply_voltage

3.3, 5 V

Max_operating_supply_voltage

5.5 V

Watchdog

1

Supplier_package

VQFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHP-S-A0009590839/MCHP-S-A0009590839-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

1 KB

Program_memory_type

Flash

Program_memory_size

2 KB

Product_dimensions

9 x 9 x 0.88 mm

Pin_count

64

Operating_temperature

-40 to 105 °C

On_chip_adc

8-chx10-bit

Бренд

Number_of_timers

3

Number_of_programmable_i_os

54

Mounting

Surface Mount

Maximum_speed

16 MHz

Lead_finish

Matte Tin

Тип интерфейса

SPI/USART

Instruction_set_architecture

RISC

Htsn

8542310001

Eccn

EAR99

Device_core

AVR

Data_memory_size

512 byte

Data_bus_width

8 Bit

Country_of_origin

China

Min_operating_supply_voltage

2.7 V