MCU 8-bit AT89 80C51 CISC 64KB Flash 3.3V/5V 44-Pin VQFP Tray, AT89C51ID2-RLTUM, Microchip

The AT89C51ID2 retains all features of the 80C52 with 256 bytes of internal RAM, a 10-source 4-level interrupt controller and three timer/counters. In addition, the AT89C51ID2 has a Programmable Counter Array, an XRAM of 1792 bytes, a Hardware Watchdog Timer, SPI and Keyboard, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a speed improvement mechanism (X2 mode). The fully static design of the AT89C51ID2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The AT89C51ID2 has 2 software-selectable modes of reduced activity and 8-bit clock presale for further reduction in power consumption. In the Idle mode the CPU is frozen while the peripherals and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative. The added features of the AT89C51ID2 make it more powerful for applications that need pulse width modulation, high speed I/O and counting capabilities such as alarms, motor control, corded phones, smart card readers.

  • 80C52 Compatible
    • 8051 Instruction Compatible
    • Six 8-bit I/O Ports (64 pins or 68 Pins Versions)
    • Four 8-bit I/O Ports (44 Pins Version)
    • Three 16-bit Timer/Counters
    • 256 bytes Scratch Pad RAM
    • 10 Interrupt Sources With 4 Priority Levels
  • ISP (In-System Programming) Using Standard VCC Power Supply
  • Integrated Power Monitor (POR/PFD) to Supervise Internal Power Supply
  • Boot ROM Contains Low Level Flash Programming Routines and a Default Serial Loader
  • Dual Data Pointer
  • 32 KHz Crystal Oscillator
  • Variable Length MOVX for Slow RAM/Peripherals
  • Improved X2 Mode with Independant Selection for CPU and Each Peripheral
  • Keyboard Interrupt Interface on Port 1
  • SPI Interface (Master/Slave Mode)
  • 8-bit Clock Prescaler
  • Two Wire Interface 400K bit/s
  • Asynchronous Port Reset
  • Full Duplex Enhanced UART with Dedicated Internal Baud Rate Generator
  • Low EMI (inhibit ALE)
  • Hardware Watchdog Timer (One-time Enabled with Reset-Out), Power-Off Flag
  • Power Control Modes: Idle Mode, Power-down Mode
  • Power Supply: 2.7V to 5.5V
  • Temperature Ranges: Industrial (-40°C to +85°C)
  • Packages: PLCC44, VQFP44

Характеристики

Бренд

Country_of_origin

Philippines

Data_bus_width

8 Bit

Device_core

80C51

Eccn

3A991.A.2

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

SPI/UART

Lead_finish

Matte Tin

Max_processing_temp

260

Maximum_speed

40 MHz

Mounting

Surface Mount

Msl_level

3

Number_of_programmable_i_os

34

Number_of_timers

3

Operating_supply_voltage

3.3, 5 V

Operating_temperature

-40 to 85 °C

Pin_count

44

Product_dimensions

10.1 x 10.1 x 1.45 mm

Program_memory_size

64 KB

Program_memory_type

Flash

Ram_size

2 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/ATML/ATMLS03547/ATMLS03547-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

VQFP

Max_operating_supply_voltage

5.5 V

Min_operating_supply_voltage

2.7 V

Max_power_dissipation

1000 mW

Артикул: AT89C51ID2-RLTUM

Описание

The AT89C51ID2 retains all features of the 80C52 with 256 bytes of internal RAM, a 10-source 4-level interrupt controller and three timer/counters. In addition, the AT89C51ID2 has a Programmable Counter Array, an XRAM of 1792 bytes, a Hardware Watchdog Timer, SPI and Keyboard, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a speed improvement mechanism (X2 mode). The fully static design of the AT89C51ID2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The AT89C51ID2 has 2 software-selectable modes of reduced activity and 8-bit clock presale for further reduction in power consumption. In the Idle mode the CPU is frozen while the peripherals and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative. The added features of the AT89C51ID2 make it more powerful for applications that need pulse width modulation, high speed I/O and counting capabilities such as alarms, motor control, corded phones, smart card readers.

  • 80C52 Compatible
    • 8051 Instruction Compatible
    • Six 8-bit I/O Ports (64 pins or 68 Pins Versions)
    • Four 8-bit I/O Ports (44 Pins Version)
    • Three 16-bit Timer/Counters
    • 256 bytes Scratch Pad RAM
    • 10 Interrupt Sources With 4 Priority Levels
  • ISP (In-System Programming) Using Standard VCC Power Supply
  • Integrated Power Monitor (POR/PFD) to Supervise Internal Power Supply
  • Boot ROM Contains Low Level Flash Programming Routines and a Default Serial Loader
  • Dual Data Pointer
  • 32 KHz Crystal Oscillator
  • Variable Length MOVX for Slow RAM/Peripherals
  • Improved X2 Mode with Independant Selection for CPU and Each Peripheral
  • Keyboard Interrupt Interface on Port 1
  • SPI Interface (Master/Slave Mode)
  • 8-bit Clock Prescaler
  • Two Wire Interface 400K bit/s
  • Asynchronous Port Reset
  • Full Duplex Enhanced UART with Dedicated Internal Baud Rate Generator
  • Low EMI (inhibit ALE)
  • Hardware Watchdog Timer (One-time Enabled with Reset-Out), Power-Off Flag
  • Power Control Modes: Idle Mode, Power-down Mode
  • Power Supply: 2.7V to 5.5V
  • Temperature Ranges: Industrial (-40°C to +85°C)
  • Packages: PLCC44, VQFP44

Детали

Бренд

Country_of_origin

Philippines

Data_bus_width

8 Bit

Device_core

80C51

Eccn

3A991.A.2

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

SPI/UART

Lead_finish

Matte Tin

Max_processing_temp

260

Maximum_speed

40 MHz

Mounting

Surface Mount

Msl_level

3

Number_of_programmable_i_os

34

Number_of_timers

3

Operating_supply_voltage

3.3, 5 V

Operating_temperature

-40 to 85 °C

Pin_count

44

Product_dimensions

10.1 x 10.1 x 1.45 mm

Program_memory_size

64 KB

Program_memory_type

Flash

Ram_size

2 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/ATML/ATMLS03547/ATMLS03547-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

VQFP

Max_operating_supply_voltage

5.5 V

Min_operating_supply_voltage

2.7 V

Max_power_dissipation

1000 mW