MCU 8-bit 87C 8051 CISC 16KB EPROM 5V 40-Pin PDIP W, DS87C520-MNL+, Maxim Integrated

The DS87C520-MNL+ EPROM/ROM high-speed microcontrollers are fast 8051-compatible microcontrollers. They feature a redesigned processor core without wasted clock and memory cycles. As a result, the devices execute every 8051 instruction between 1.5 and 3 times faster than the original for the same crystal speed. Typical applications will see a speed improvement of 2.5 times using the same code and the same crystal. The DS87C520-MNL+ offer a maximum crystal speed of 33MHz, resulting in apparent execution speeds of 82.5MHz (approximately 2.5X). Besides greater speed, the microcontroller includes a second full hardware serial port, seven additional interrupts, programmable Watchdog Timer, Brownout Monitor, and Power-Fail Reset. The device also provides dual data pointers (DPTRs) to speed block data memory moves. It also can adjust the speed of MOVX data memory access from two to nine machine cycles for flexibility in selecting external memory and peripherals. A new Power Management Mode (PMM) is useful for portable applications. This feature allows software to select a lower speed clock as the main time base. While normal operation has a machine cycle rate of 4 clocks per cycle, the PMM runs the processor at 64 or 1024 clocks per cycle. For example, at 12MHz, standard operation has a machine cycle rate of 3MHz. In Power Management Mode, software can select either 187.5kHz or 11.7kHz machine cycle rate. There is a corresponding reduction in power consumption when the processor runs slower. The EMI reduction feature allows software to select a reduced emission mode. This disables the ALE signal when it is unneeded.

  • 80C52 Compatible
    • 8051 Pin- and Instruction-Set Compatible
    • Four 8-Bit I/O Ports
    • Three 16-Bit Timer/Counters
    • 256 Bytes Scratchpad RAM
  • Large On-Chip Memory
    • 16kB Program Memory
    • 1kB Extra On-Chip SRAM for MOVX
  • ROMSIZE Feature
    • Selects Internal ROM Size from 0 to 16kB
    • Allows Access to Entire External Memory Map
    • Dynamically Adjustable by Software
    • Useful as Boot Block for External Flash
  • High-Speed Architecture
    • 4 Clocks/Machine Cycle (8051 = 12)
    • Runs DC to 33MHz Clock Rates
    • Single-Cycle Instruction in 121ns
    • Dual Data Pointer
    • Optional Variable Length MOVX to Access
    • Fast/Slow RAM/Peripherals
  • Power Management Mode
    • Programmable Clock Source to Save Power
    • CPU Runs from (crystal/64) or (crystal/1024)
    • Provides Automatic Hardware and Software Exit
  • EMI Reduction Mode Disables ALE
  • Two Full-Duplex Hardware Serial Ports
  • High Integration Controller Includes:
    • Power-Fail Reset
    • Early-Warning Power-Fail Interrupt
    • Programmable Watchdog Timer
  • 13 Interrupt Sources with Six External
  • Available in 40-Pin Plastic DIP
  • EPROM (OTP)

Характеристики

Бренд

Operating_temperature

-40 to 85 °C

Min_operating_supply_voltage

4.5 V

Max_operating_supply_voltage

5.5 V

Supplier_package

PDIP W

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS11850/MAXMS11850-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

1.25 KB

Program_memory_type

EPROM

Program_memory_size

16 KB

Product_dimensions

52.71 x 14.61 x 4.45 mm

Pin_count

40

Operating_supply_voltage

5 V

Country_of_origin

Philippines

Number_of_timers

3

Number_of_programmable_i_os

32

Msl_level

1

Mounting

Through Hole

Maximum_speed

33 MHz

Lead_finish

Matte Tin

Тип интерфейса

UART

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

8051

Max_expanded_memory_size

64 KB

Артикул: DS87C520-MNL+

Описание

The DS87C520-MNL+ EPROM/ROM high-speed microcontrollers are fast 8051-compatible microcontrollers. They feature a redesigned processor core without wasted clock and memory cycles. As a result, the devices execute every 8051 instruction between 1.5 and 3 times faster than the original for the same crystal speed. Typical applications will see a speed improvement of 2.5 times using the same code and the same crystal. The DS87C520-MNL+ offer a maximum crystal speed of 33MHz, resulting in apparent execution speeds of 82.5MHz (approximately 2.5X). Besides greater speed, the microcontroller includes a second full hardware serial port, seven additional interrupts, programmable Watchdog Timer, Brownout Monitor, and Power-Fail Reset. The device also provides dual data pointers (DPTRs) to speed block data memory moves. It also can adjust the speed of MOVX data memory access from two to nine machine cycles for flexibility in selecting external memory and peripherals. A new Power Management Mode (PMM) is useful for portable applications. This feature allows software to select a lower speed clock as the main time base. While normal operation has a machine cycle rate of 4 clocks per cycle, the PMM runs the processor at 64 or 1024 clocks per cycle. For example, at 12MHz, standard operation has a machine cycle rate of 3MHz. In Power Management Mode, software can select either 187.5kHz or 11.7kHz machine cycle rate. There is a corresponding reduction in power consumption when the processor runs slower. The EMI reduction feature allows software to select a reduced emission mode. This disables the ALE signal when it is unneeded.

  • 80C52 Compatible
    • 8051 Pin- and Instruction-Set Compatible
    • Four 8-Bit I/O Ports
    • Three 16-Bit Timer/Counters
    • 256 Bytes Scratchpad RAM
  • Large On-Chip Memory
    • 16kB Program Memory
    • 1kB Extra On-Chip SRAM for MOVX
  • ROMSIZE Feature
    • Selects Internal ROM Size from 0 to 16kB
    • Allows Access to Entire External Memory Map
    • Dynamically Adjustable by Software
    • Useful as Boot Block for External Flash
  • High-Speed Architecture
    • 4 Clocks/Machine Cycle (8051 = 12)
    • Runs DC to 33MHz Clock Rates
    • Single-Cycle Instruction in 121ns
    • Dual Data Pointer
    • Optional Variable Length MOVX to Access
    • Fast/Slow RAM/Peripherals
  • Power Management Mode
    • Programmable Clock Source to Save Power
    • CPU Runs from (crystal/64) or (crystal/1024)
    • Provides Automatic Hardware and Software Exit
  • EMI Reduction Mode Disables ALE
  • Two Full-Duplex Hardware Serial Ports
  • High Integration Controller Includes:
    • Power-Fail Reset
    • Early-Warning Power-Fail Interrupt
    • Programmable Watchdog Timer
  • 13 Interrupt Sources with Six External
  • Available in 40-Pin Plastic DIP
  • EPROM (OTP)

Детали

Бренд

Operating_temperature

-40 to 85 °C

Min_operating_supply_voltage

4.5 V

Max_operating_supply_voltage

5.5 V

Supplier_package

PDIP W

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS11850/MAXMS11850-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

1.25 KB

Program_memory_type

EPROM

Program_memory_size

16 KB

Product_dimensions

52.71 x 14.61 x 4.45 mm

Pin_count

40

Operating_supply_voltage

5 V

Country_of_origin

Philippines

Number_of_timers

3

Number_of_programmable_i_os

32

Msl_level

1

Mounting

Through Hole

Maximum_speed

33 MHz

Lead_finish

Matte Tin

Тип интерфейса

UART

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

8051

Max_expanded_memory_size

64 KB