B2B товарно-сырьевая площадка

Регистрация
Разместить объявление
MCU 32-Bit TX03 ARM Cortex M3 RISC 512KB Flash 3.3V 100-Pin LQFP

MCU 32-Bit TX03 ARM Cortex M3 RISC 512KB Flash 3.3V 100-Pin LQFP

32 Bit RISC Microcontroller
  • ARM Cortex-M3 microprocessor core
    • Improved code efficiency has been realized through the use of Thumb® -2 instruction.
    • New 16-bit Thumb instructions for improved program flow
    • New 32-bit Thumb instructions for improved performance
    • New Thumb mixed 16-/32-bit instruction set can produce faster, more efficient code. b. Both high performance and low power consumption have been achieved. [High performance]
    • A 32-bit multiplication (32×32=32 bit) can be executed with one clock.
    • Division takes between 2 and 12 cycles depending on dividend and devisor [Low power consumption]
    • Optimized design using a low power consumption library
    • Standby function that stops the operation of the micro controller core
    • High-speed interrupt response suitable for real-time control
    • An interruptible long instruction.
    • Stack push automatically handled by hardware.
  • 16-bit timer (TMRB): 10 channels
    • 16-bit interval timer mode
    • 16-bit event counter mode
    • 16-bit PPG output
    • Input capture function
  • Real time clock (RTC): 1 channel
    • Clock (hour, minute and second)
    • Calendar (month, week, date and leap year)
    • Time correction + or - 30seconds (by software)
    • Alarm (Alarm output)
    • Alarm interrupt
  • Watchdog timer (WDT): 1 channel
    • Watchdog timer (WDT) generates a reset or a non-maskable interrupt (NMI).
  • General-purpose serial interface (SIO/UART): 3 channels
    • Either UART mode or synchronous mode can be selected (4byte FIFO equipped)
  • Serial bus interface (I2C/SIO): 3channels
    • Either I2C bus mode or synchronous mode can be selected.
  • CEC function (CEC): 1 channel
    • Transmission and reception per 1 byte.
  • Remote control signal preprocessor (RMC): 2 channels
    • Can receive up to 72bit data at a time
  • 10-bit AD converter (ADC): 12 channels
    • Start by an internal timer trigger
    • Fixed channel/scan mode
    • Single/repeat mode
    • AD monitoring 2ch
    • Conversion speed 1.15µsec. (@fsys = 40MHz)
  • Interrupt source
    • Internal: 42 factors...The order of precedence can be set over 7 levels (except the watchdog timer interrupt).
    • External: 8 factors...The order of precedence can be set over 7 levels.
  • Non-maskable interrupt (NMI) Non-maskable interrupt (NMI) is generated by a watchdog timer or a NMI pin.
  • Input/ output ports (PORT): 78 pins
  • Standby mode
    • Standby modes: IDLE, SLOW, SLEEP, STOP
    • Sub clock operation(32.768kHz):SLOW, SLEEP
  • Clock generator (CG)
    • On-chip PLL (quadrupled)
    • Clock gear function: The high-speed clock can be divided into 1/1, 1/2, 1/4 or 1/8.
  • Endian Little endian

Характеристики

Бренд Toshiba
Interface Type I2C/SIO/UART
Maximum O 3.6 V
Operating 3.3 V
Supplier LQFP
Number Of 10
Program M 512 Kb
Data Bus Width 32 Bit
Max Proce 260 °C
On Chip Adc 12-chx10-bit
Рабочая температура -20 to 85 °C
Minimum O 2.7 V
Watchdog 1
Instructi RISC
Program M Flash
Описание продукта 14 x 14 x 1.4
Maximum Speed 40 MHz
Device Core ARM Cortex M3
Lead Finish Tin|Silver|Copper
Number Of 78
Ram Size 32 KB
Schedule B 8517620050
HTSN 8542310001
Страна происхождения Japan
SKU: TMPM330FDFG(C)