Описание
MCU 32-Bit TX03 ARM Cortex M3 RISC 1MB Flash 3.3V 100-Pin LQFP Tray
- ARM Cortex-M3 microprocessor core
- Improved code efficiency has been realized through the use of Thumb®-2 instruction.
- New 16-bit Thumb instructions for improved program flow
- New 32-bit Thumb instructions for improved performance
- New Thumb mixed 16-/32-bit instruction set can produce faster, more efficient code.
- Both high performance and low power consumption have been achieved.
- High performance
- A 32-bit multiplication (32×32=32 bit) can be executed with one clock.
- Division takes between 2 and 12 cycles depending on dividend and devisor
- Low power consumption
- Optimized design using a low power consumption library
- Standby function that stops the operation of the micro controller core
- High-speed interrupt response suitable for real-time control
- An interruptible long instruction.
- Stack push automatically handled by hardware.
- High-speed programming and low power consumption using Toshiba NANO FLASH™ technology
- High-speed programming has an effect on mass production stage and developing device
- Low power consumption design
- On-chip program memory and data memory
- On-chip FlashROM : 1024 Kbytes
- On-chip RAM : 258 Kbytes
- µDMA controller (µDMAC) : 32 channels / 2 units Transfer object : On-chip memory, on-chip I/O and external memory16-bit timer (TMRB) : 8 channels
- 16-bit interval timer mode
- 16-bit event counter mode
- 16-bit PPG output (4-phase synchronous output supported)
- Input capture function
- Real-time clock (RTC) : 1 channel
- Clock (hour, minute and second)
- Calendar (Month, week, date and leap year)
- Operable regardless of operational modes (NORMAL/IDLE/STOP1/STOP2)
- Clock adjustment (by software)
- Watch-dog timer (WDT) : 1 channelWatchdog timer (WDT) generates a reset or a non-mask able interrupt (NMI).
- General-purpose serial interface (SIO/UART) : 4 channelsEither UART mode or synchronous mode can be selected (4byte FIFO equipped)
- Serial bus interface (I2C/SIO) : 3 channelsEither I2C bus mode or synchronous mode can be selected.
