Описание
MCU 32-Bit TX00 ARM Cortex M0 RISC 128KB Flash 2.5V/3.3V 64-Pin LQFP Tray
- ARM®Cortex®-M0 microprocessor core
- Improved code efficiency has been realized through the use of Thumb®-2 instruction.
- Both high performance and low power consumption have been achieved.
- [High performance]
- A 32-bit multiplication (32 x 32=32 bit) can be executed with one clock.
- [Low power consumptions]
- Optimized design using a low power consumption library
- Standby function that stops the operation of the micro controller core
- High-speed interrupt response suitable for real-time control
- An interruptible long instruction.
- Stack push automatically handled by hardware.
- Endian: Little endian
- On Chip program memory and data memory
- On chip Flash ROM: 128 Kbyte
- On chip RAM: 16 Kbyte
- DMA controller (DMAC): 2 channels / 1 unit
- Transfer mode: Built-in memory, peripheral function and external memory.
- Clock generator (CG)
- External Clock input /external oscillation (8MHz to 20MHz)
- on Chip PLL (2x)
- Clock gear function: The high-speed clock can be divided into 1/1, 1/2, 1/4, 1/8, 1/16.
- Standby mode IDLE, STOP1
- Interrupt source: The order of priority can be set to 4 levels.
- Internal: 24factors
- External: 6 factorsInput/output ports (PORT): 52 pinsInput/output pin: 51 pinsOutput pin: 1 pin
- 16-bit timer (TMRB): 8 channels
- 16-bit interval timer mode
- 16-bit event counter mode
- 16-bit PPG output (4 Phase Synchronous mode)
- Input capture function
- 16-bit timer (TMR16A): 2 channels
- Watchdog timer (WDT): 1 channel Watchdog timer (WDT) generates a reset or a non-mask able interrupt (NMI).
- General-purpose serial interface (SIO/UART): 5 channels
- Either UART mode or synchronous mode can be selected
- Transmit FIFO: 4-stage 8-bit width, receive FIFO: 4-stage 8-bit width
- I2C bus interface (I2C): 1 channel Communication rate 100kbps / 400kbps
- 10-bit AD converter (ADC):1 unit (8 channels)
- Fixed channel/scan mode
- Single/repeat mode
- support Repeat conversion
- AD monitoring
- LVD/POR function: 1 unit
- Maximum operating frequency: 20MHz
- Debug Interface SWD is supported.
