The ultra-low-power STM32L162xD devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex -M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 384 Kbytes and RAM up to 48 Kbytes), a flexible static memory controller (FSMC) interface (for devices with packages of 100 pins and more) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.The STM32L162xD devices offer three operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, AES, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.Moreover, the STM32L162xD devices contain standard and advanced communication interfaces: up to two I²Cs, three SPIs, two I²S, one SDIO, three USARTs, two UARTs and an USB. The STM32L162xD devices offer up to 34 capacitive sensing channels to simply add a touch sensing functionality to any application.They also include a real-time clock and a set of backup registers that remain powered in Standby mode.Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.The ultra-low-power STM32L162xD devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.
Ultra-low-power platform
1.65 V to 3.6 V power supply
-40°C to 105°C temperature range
305 nA Standby mode (3 wakeup pins)
1.15 µA standby mode + RTC
0.475 µA Stop mode (16 wakeup lines)
1.35 µA Stop mode + RTC
11 µA Low-power run mode
230 µA/MHz Run mode
10 nA ultra-low I/O leakage
8 µs wakeup time
AES-128 bit encryption hardware accelerator
Core: ARM® Cortex® -M3 32-bit CPU
From 32 kHz up to 32 MHz max
1.25 DMIPS/MHz (Dhrystone 2.1)
Memory protection unit
Reset and supply management
Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds
Ultra-low-power POR/PDR
Programmable voltage detector (PVD)
Clock sources
1 to 24 MHz crystal oscillator
32 kHz oscillator for RTC with calibration
High speed internal 16 MHz factory-trimmed RC (+/- 1%)
Internal low power 37 kHz RC
Internal multispeed low power 65 kHz to 4.2 MHz
PLL for CPU clock and USB (48 MHz)
Pre-programmed bootloader
USB and USART supported
Development support
Serial wire debug supported
JTAG and trace supported
Up to 116 fast I/Os (102 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
Memories
384 KB Flash memory with ECC (with 2 banks of 192 KB enabling Rww capability)
48 KB RAM
12 KB of true EEPROM with ECC
128 Byte backup register
Memory interface controller supporting SRAM, PSRAM and NOR Flash
LCD driver for up to 8×40 segments
Support contrast adjustment
Support blinking mode
Step-up converter on board
Rich analog peripherals (down to 1.8V)
3x operational amplifiers
12-bit ADC 1 Msps up to 40 channels
12-bit DAC 2 ch with output buffers
2x ultra-low-power comparators(window mode and wakeup capability)
DMA controller 12x channels
12x peripheral communication interfaces
1x USB 2.0 (internal 48 MHz PLL)
5x USART
3x SPI 16Mbits/s (2x SPI with I2S)
2x I2C (SMBus/PMBus)
1x SDIO interface
11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
Up to 34 capacitive sensing channels
CRC calculation unit, 96-bit unique ID
