MCU 32-Bit STM32F ARM Cortex M4 RISC 1MB Flash 100-Pin UFBGA 7x7mm, STM32F412VGH6, STMicroelectronics

The STM32F412XE/G devices are based on the high-performance ARM Cortex -M4 32- bit RISC core operating at a frequency of up to 100 MHz. Their Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision dataprocessing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F412XE/G belong to the STM32 Dynamic Efficiency™ product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching. The STM32F412XE/G incorporate high-speed embedded memories (up to 1 Mbyte of Flash memory, 256 Kbyte of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. All devices offer one 12-bit ADC, a low-power RTC, twelve general-purpose 16-bit timers, two PWM timer for motor control and two general-purpose 32-bit timers.

  • Dynamic Efficiency Line with BAM (Batch Acquisition Mode)
  • Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    • Up to 1 Mbyte of Flash memory
    • 256 Kbyte of SRAM
    • Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
    • Dual mode Quad-SPI interface
  • LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management
    • 1.7 V to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Power consumption
    • Run: 112 µA/MHz (peripheral off)
    • Stop (Flash in Stop mode, fast wakeup time): 50 µA Typ @ 25 °C; 75 µA max @25 °C
    • Stop (Flash in Deep power down mode, slow wakeup time): down to 18 µA @ 25 °C; 40 µA max @25 °C
    • Standby: 2.4 µA @25 °C / 1.7 V without RTC; 12 µA @85 °C @1.7 V
    • VBAT supply for RTC: 1 µA @25 °C
  • 1×12-bit, 2.4 MSPS ADC: up to 16 channels
  • 2x digital filters for sigma delta modulator, 4x PDM interfaces, stereo microphone support
  • General-purpose DMA: 16-stream DMA
  • Up to 17 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer
  • Debug mode
    • Serial wire debug (SWD) & JTAG
    • Cortex®-M4 Embedded Trace Macrocell™
  • Up to 114 I/O ports with interrupt capability
    • Up to 109 fast I/Os up to 100 MHz
    • Up to 114 five V-tolerant I/Os

Характеристики

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0004202317/SGST-S-A0004202317-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

CAN Controller, LCD Controller

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

32 KB

Program_memory_size

1 KB

Product_dimensions

14 x 14 x 1.4 mm

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 2.5, 3.3 V

Watchdog

2

Eccn

3A991.A.2

Instruction_set_architecture

RISC

Htsn

8542310001

Display_driver

1

Тип интерфейса

CAN/I2C/I2S/MMC/SDIO/SPI/USART

Device_core

ARM Cortex M4

Data_bus_width

32 Bit

Country_of_origin

Philippines

Бренд

On_chip_adc

16-chx12-bit

Min_operating_supply_voltage

1.7 V

Number_of_timers

14

Number_of_programmable_i_os

81

Mounting

Surface Mount

Max_speed

100 MHz

Max_power_dissipation

465 mW

Max_operating_supply_voltage

3.6 V

Артикул: STM32F412VGH6

Описание

The STM32F412XE/G devices are based on the high-performance ARM Cortex -M4 32- bit RISC core operating at a frequency of up to 100 MHz. Their Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision dataprocessing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F412XE/G belong to the STM32 Dynamic Efficiency™ product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching. The STM32F412XE/G incorporate high-speed embedded memories (up to 1 Mbyte of Flash memory, 256 Kbyte of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. All devices offer one 12-bit ADC, a low-power RTC, twelve general-purpose 16-bit timers, two PWM timer for motor control and two general-purpose 32-bit timers.

  • Dynamic Efficiency Line with BAM (Batch Acquisition Mode)
  • Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    • Up to 1 Mbyte of Flash memory
    • 256 Kbyte of SRAM
    • Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
    • Dual mode Quad-SPI interface
  • LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management
    • 1.7 V to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Power consumption
    • Run: 112 µA/MHz (peripheral off)
    • Stop (Flash in Stop mode, fast wakeup time): 50 µA Typ @ 25 °C; 75 µA max @25 °C
    • Stop (Flash in Deep power down mode, slow wakeup time): down to 18 µA @ 25 °C; 40 µA max @25 °C
    • Standby: 2.4 µA @25 °C / 1.7 V without RTC; 12 µA @85 °C @1.7 V
    • VBAT supply for RTC: 1 µA @25 °C
  • 1×12-bit, 2.4 MSPS ADC: up to 16 channels
  • 2x digital filters for sigma delta modulator, 4x PDM interfaces, stereo microphone support
  • General-purpose DMA: 16-stream DMA
  • Up to 17 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer
  • Debug mode
    • Serial wire debug (SWD) & JTAG
    • Cortex®-M4 Embedded Trace Macrocell™
  • Up to 114 I/O ports with interrupt capability
    • Up to 109 fast I/Os up to 100 MHz
    • Up to 114 five V-tolerant I/Os

Детали

Program_memory_type

Flash

Supplier_package

LQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0004202317/SGST-S-A0004202317-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

CAN Controller, LCD Controller

Screening_level

Industrial

Schedule_b

8542310000

Ram_size

32 KB

Program_memory_size

1 KB

Product_dimensions

14 x 14 x 1.4 mm

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 2.5, 3.3 V

Watchdog

2

Eccn

3A991.A.2

Instruction_set_architecture

RISC

Htsn

8542310001

Display_driver

1

Тип интерфейса

CAN/I2C/I2S/MMC/SDIO/SPI/USART

Device_core

ARM Cortex M4

Data_bus_width

32 Bit

Country_of_origin

Philippines

Бренд

On_chip_adc

16-chx12-bit

Min_operating_supply_voltage

1.7 V

Number_of_timers

14

Number_of_programmable_i_os

81

Mounting

Surface Mount

Max_speed

100 MHz

Max_power_dissipation

465 mW

Max_operating_supply_voltage

3.6 V